upstream v2.7.22.96dd647

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.github/copilot-instructions.md

@@ -47,7 +47,7 @@ Messages are published/subscribed using a hierarchical topic format:
 #### Configuration Defaults (from `Default.h`)
 
 ```cpp
-#define default_mqtt_address "mqtt.mess.host"
+#define default_mqtt_address "mqtt.meshtastic.org"
 #define default_mqtt_username "meshdev"
 #define default_mqtt_password "large4cats"
 #define default_mqtt_root "msh"

.github/workflows/build_debian_src.yml

@@ -39,6 +39,7 @@ jobs:
           sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
 
       - name: Import GPG key
+        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
         uses: crazy-max/ghaction-import-gpg@v7
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}

.github/workflows/build_one_target.yml

@@ -4,9 +4,14 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
+          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -15,32 +20,18 @@ on:
           - rp2040
           - rp2350
           - stm32
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
+        description: Choose an arch to limit the search, or 'all' to search all architectures.
+        default: all
 
 permissions: read-all
 
 jobs:
   find-targets:
-    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -51,14 +42,37 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
+        env:
+          BUILDTARGET: ${{ inputs.target }}
+          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          if [ "$BUILDTARGET" = "" ]; then
+            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
+            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
+          else
+            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
+            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            if [[ "$ARCH" == "" ]]; then
+              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
+            else
+              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
+            fi
+            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
+            echo "arch=$ARCH" >> $GITHUB_OUTPUT
+          fi
+    outputs:
+      arch: ${{ steps.jsonStep.outputs.arch }}
 
   version:
     if: ${{ inputs.target != '' }}
@@ -78,12 +92,12 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
+    needs: [version, find-targets]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
+      platform: ${{ needs.find-targets.outputs.arch }}
 
   gather-artifacts:
     permissions:

.github/workflows/docker_build.yml

@@ -56,24 +56,32 @@ jobs:
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - name: Docker login
-        if: ${{ inputs.push }}
-        uses: docker/login-action@v4
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v4
+        with:
+          cache-image: true
 
       - name: Docker setup
         uses: docker/setup-buildx-action@v4
+        with:
+          # Add Google/Amazon DockerHub mirrors to buildkit config
+          # https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
+          buildkitd-config-inline: |
+            [registry."docker.io"]
+              mirrors = ["mirror.gcr.io", "public.ecr.aws"]
 
       - name: Sanitize platform string
         id: sanitize_platform
         # Replace slashes with underscores
         run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
 
+      - name: Docker login
+        if: ${{ inputs.push }}
+        uses: docker/login-action@v4
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
       - name: Docker tag
         id: meta
         uses: docker/metadata-action@v6
@@ -95,3 +103,6 @@ jobs:
           platforms: ${{ inputs.platform }}
           build-args: |
             PIO_ENV=${{ inputs.pio_env }}
+          # Cache image layers in GitHub Actions cache to speed up subsequent builds.
+          cache-from: type=gha
+          cache-to: type=gha,mode=max

.github/workflows/main_matrix.yml

@@ -312,7 +312,7 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
-        uses: softprops/action-gh-release@v2
+        uses: softprops/action-gh-release@v3
         id: create_release
         with:
           draft: true