zruncho3d · two-cees · Apr 5, 2023
diff --git a/.DS_Store b/.DS_Store
diff --git a/CAD/.DS_Store b/CAD/.DS_Store
diff --git a/Mods/.DS_Store b/Mods/.DS_Store
diff --git a/Mods/csch0/.DS_Store b/Mods/csch0/.DS_Store
diff --git a/Mods/csch0/DeckPanel/.DS_Store b/Mods/csch0/DeckPanel/.DS_Store
diff --git a/Mods/csch0/DeckPanel/STLs/.DS_Store b/Mods/csch0/DeckPanel/STLs/.DS_Store
diff --git a/Mods/hbo/.DS_Store b/Mods/hbo/.DS_Store
diff --git a/Mods/two_cees/.DS_Store b/Mods/two_cees/.DS_Store
diff --git a/Mods/two_cees/LED Bed Front/.DS_Store b/Mods/two_cees/LED Bed Front/.DS_Store
diff --git a/Mods/two_cees/LED Bed Front/CAD/T0 SB Front.step b/Mods/two_cees/LED Bed Front/CAD/T0 SB Front.step
diff --git a/Mods/two_cees/LED Bed Front/Images/T0 SB front close.jpg b/Mods/two_cees/LED Bed Front/Images/T0 SB front close.jpg
diff --git a/Mods/two_cees/LED Bed Front/Images/T0B0 with T0 SB front.jpg b/Mods/two_cees/LED Bed Front/Images/T0B0 with T0 SB front.jpg
diff --git a/Mods/two_cees/LED Bed Front/STLs/(c) LDO clear diffuser.3mf b/Mods/two_cees/LED Bed Front/STLs/(c) LDO clear diffuser.3mf
diff --git a/Mods/two_cees/LED Bed Front/STLs/.DS_Store b/Mods/two_cees/LED Bed Front/STLs/.DS_Store
diff --git a/Mods/two_cees/LED Bed Front/STLs/T0 SB Front LED carrier.3mf b/Mods/two_cees/LED Bed Front/STLs/T0 SB Front LED carrier.3mf
diff --git a/Mods/two_cees/LED Bed Front/STLs/T0 SB front main.3mf b/Mods/two_cees/LED Bed Front/STLs/T0 SB front main.3mf
diff --git a/Mods/two_cees/Premade Endstop Housing/.DS_Store b/Mods/two_cees/Premade Endstop Housing/.DS_Store
diff --git a/Mods/two_cees/Premade Endstop Housing/CAD/Pre-Made IJ Endstop Housing.step b/Mods/two_cees/Premade Endstop Housing/CAD/Pre-Made IJ Endstop Housing.step
diff --git a/Mods/two_cees/Premade Endstop Housing/Readme.txt b/Mods/two_cees/Premade Endstop Housing/Readme.txt
@@ -0,0 +1,5 @@
+This is an alternative housing that can be used for the guts of one of the pre-made injection molded Z endstops.
+You will have to free the brass sleeve and pin. I found it easy to take a hotend to the IJ plastic then push it out.
+You will have to desolder the switch and flip it. The one I bought used a knock off switch so I replaced it with an OMRON.
+I found the pin to be a hair too short and replaced it with a slightly longer one to ensure the extruder would not hit the buildplate
+The hole is offset to put the end stop in the correct position if you push the housing as forward on the Y extrusion as you can.
diff --git a/Mods/two_cees/Premade Endstop Housing/STLs/Pre-Made Endstop Housing.3mf b/Mods/two_cees/Premade Endstop Housing/STLs/Pre-Made Endstop Housing.3mf
diff --git a/Mods/two_cees/Premade Endstop Housing/STLs/Pre-made endstop housing plate.stl b/Mods/two_cees/Premade Endstop Housing/STLs/Pre-made endstop housing plate.stl