./build.sh [project_name] [action]
[action]:
i|-i : current config information
I|-I : get chip info
p|-p : current patition information
d|-d : Get target information
v|-v : Validate config and target data
f|-f : make flash
e|-e : make erase
m|-m : make monitor
b|-b : make
c|-c : make clean
M|-M : make menuconfig
P|-P : build partition_table
convertCSV|-convertCSV : convert CSV to Binary manually
convertBin|-convertBin : convert Bin to CSV manually
fm|-fm: make flash monitor
fo|-fo|flash_ota_data: flash ota config data
fb|-fb|flash_boot [(optional) bootloader file]: make flash bootloader
fp|-fp|flash_ptable: flash partition_table
fa|-fa|flash_app: flash main application
- Get current firmware configuration
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world i
=== Common configuration ===
usb : /dev/ttyUSB0(exist)
platform : ESP8266
baud : 115200
chip : esp8266
flash freq : 40m
flash size : 4MB
flash mode : dio
before flash : default_reset
after flash : hard_reset
=== OTA configuration ===
ota enabled : NO
ota init file :
ota init addr :
=== Bootloader configuration ===
bootloader file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/bootloader/bootloader.bin
bootloader addr : 0x0000
=== Partition configuration ===
custom csv : partitions.csv
partition csv : partitions_singleapp.csv
active csv : /home/thanh/build/esp8266/ESP8266_RTOS_SDK/components/partition_table/partitions_singleapp.csv
partition file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/partitions_singleapp.bin
partition addr : 0x8000
=== factory app configuration ===
main app file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/hello-world.bin
main app addr : 0x10000
- Read information from connected esp8266
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world I
esptool.py v2.4.0
Connecting....
Chip is ESP8266EX
Features: WiFi
MAC: bc:dd:c2:0f:de:43
Uploading stub...
Running stub...
Stub running...
Manufacturer: 20
Device: 4016
Detected flash size: 4MB
Hard resetting via RTS pin...
- Get the partition table configuration of current firmware
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world p
Current partition configuration of
# Name, Type, SubType, Offset, Size, Flags
# Note: if you change the phy_init or app partition offset, make sure to change the offset in Kconfig.projbuild
nvs, data, nvs, 0x9000, 0x6000,
phy_init, data, phy, 0xf000, 0x1000,
factory, app, factory, 0x10000, 0xF0000
- Rebuild the partition table
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world P
Toolchain path: /home/thanh/.espressif/tools/xtensa-lx106-elf/esp-2020r3-49-gd5524c1-8.4.0/xtensa-lx106-elf/bin/xtensa-lx106-elf-gcc
Toolchain version: esp-2020r3-49-gd5524c1
Compiler version: 8.4.0
Python requirements from /home/thanh/build/esp8266/ESP8266_RTOS_SDK/requirements.txt are satisfied.
Partition table binary generated. Contents:
*******************************************************************************
# Espressif ESP32 Partition Table
# Name, Type, SubType, Offset, Size, Flags
nvs,data,nvs,0x9000,24K,
phy_init,data,phy,0xf000,4K,
factory,app,factory,0x10000,960K,
*******************************************************************************
Partition flashing command:
python /home/thanh/build/esp8266/ESP8266_RTOS_SDK/components/esptool_py/esptool/esptool.py --chip esp8266 --port /dev/ttyUSB0 --baud 115200 --before default_reset --after hard_reset write_flash 0x8000 /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/partitions_singleapp.bin
Finished build partition table
- Flash the partition table to esp8266 device
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world fp
=== Common configuration ===
usb : /dev/ttyUSB0(exist)
platform : ESP8266
baud : 115200
chip : esp8266
flash freq : 40m
flash size : 4MB
flash mode : dio
before flash : default_reset
after flash : hard_reset
=== OTA configuration ===
ota enabled : NO
ota init file :
ota init addr :
=== Bootloader configuration ===
bootloader file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/bootloader/bootloader.bin
bootloader addr : 0x0000
=== Partition configuration ===
custom csv : partitions.csv
partition csv : partitions_singleapp.csv
active csv : /home/thanh/build/esp8266/ESP8266_RTOS_SDK/components/partition_table/partitions_singleapp.csv
partition file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/partitions_singleapp.bin
partition addr : 0x8000
=== factory app configuration ===
main app file : /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/hello-world.bin
main app addr : 0x10000
Current partition configuration of
# Name, Type, SubType, Offset, Size, Flags
# Note: if you change the phy_init or app partition offset, make sure to change the offset in Kconfig.projbuild
nvs, data, nvs, 0x9000, 0x6000,
phy_init, data, phy, 0xf000, 0x1000,
factory, app, factory, 0x10000, 0xF0000,
Flashing /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/partitions_singleapp.bin to 0x8000
esptool.py v2.4.0
Connecting....
Chip is ESP8266EX
Features: WiFi
MAC: bc:dd:c2:0f:de:43
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Compressed 3072 bytes to 83...
Wrote 3072 bytes (83 compressed) at 0x00008000 in 0.0 seconds (effective 2040.2 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Finished flash partition table only
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world fb
IDF_PATH:/home/thanh/build/esp8266/ESP8266_RTOS_SDK
SDK_DIR:/home/thanh/build/esp8266/ESP8266_RTOS_SDK
Flashing /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/bootloader/bootloader.bin to 0x0000
esptool.py v2.4.0
Connecting....
Chip is ESP8266EX
Features: WiFi
MAC: bc:dd:c2:0f:de:43
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Compressed 10432 bytes to 7035...
Wrote 10432 bytes (7035 compressed) at 0x00000000 in 0.6 seconds (effective 133.8 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Finished flash bootloader only
thanh@pc ~/build/thanhle/opensource/esp8266/projects (main)
└──▶ ./build.sh hello_world fa
IDF_PATH:/home/thanh/build/esp8266/ESP8266_RTOS_SDK
SDK_DIR:/home/thanh/build/esp8266/ESP8266_RTOS_SDK
Flashing /home/thanh/build/thanhle/opensource/esp8266/projects/hello_world/build/hello-world.bin to 0x10000
esptool.py v2.4.0
Connecting....
Chip is ESP8266EX
Features: WiFi
MAC: bc:dd:c2:0f:de:43
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Compressed 129328 bytes to 81428...
Wrote 129328 bytes (81428 compressed) at 0x00010000 in 7.2 seconds (effective 143.9 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Finished flash application only