Arduino Nesso N1 support

[fukuen]

This is resubmit of Arduino Nesso N1 support #8784

Issue: [Board]: Arduino Nesso N1 #8744

🤝 Attestations

• I have tested that my proposed changes behave as described.
• I have tested that my proposed changes do not cause any obvious regressions on the following devices:
  • Heltec (Lora32) V3
  • LilyGo T-Deck
  • LilyGo T-Beam
  • RAK WisBlock 4631
  • Seeed Studio T-1000E tracker card
  • Other (please specify below): M5Stack

[github-actions]

Firmware Size Report

21 targets | no baseline available yet

Target	Size
elecrow-adv-35-tft	3,361,552
heltec-ht62-esp32c3-sx1262	2,081,520
heltec-v3	2,205,424
heltec-vision-master-e213-inkhud	2,169,584
pico	735,464

Show 16 more target(s)

Target	Size
pico2	728,336
pico2w	1,176,708
picow	1,195,240
rak11200	1,802,000
rak11310	758,048
rak3172	179,580
rak3312	2,212,512
seeed-xiao-s3	2,216,448
seeed_xiao_rp2040	733,664
seeed_xiao_rp2350	726,480
station-g2	2,216,128
station-g3	2,206,752
t-deck-tft	3,752,176
t-eth-elite	2,433,104
tlora-c6	2,315,184
wio-e5	231,916

---

Updated for 21652fd