- 2x 4010 blower fans for increased part cooling performance
- compatible with original Voron 0.2 hotend mounts
- easy maintenance due to screw-together-design
Due to the larger fans, you lose roughly 10mm of buildarea in Y direction, resulting in (XYZ) 120mm x 110mm x 120mm
Use the default Voron 0.2 printing settings.
| Settings | Value |
|---|---|
| Wall count | 4 |
| Top/Bottom Layers | 5 |
| Layer Height | 0.2mm |
| Material | ABS/ASA |
| Infill | 40% |
Parts starting with V0_S_ need support for printing. You need to print one piece of every part.
Please refer to the .STEP assembly.