Collaboration Project of Arduino Hardware of SwiftDropper repository

Instructions:

A. Getting Files Ready
    1. Extract from Main and Place then in you folder --> User/Documents/Arduino
        a. Parcel Parcel_Swift
        b. Server
    2. Install libraries inside ARDUINO IDE for TFT Screen.
        a. Adafruit GFX Libraries
        b. Adafruit TouchScreen
        c. MCUFRIEND_kbv 
        d. ESP8266WiFi
        e. ESP8266HTTPClient
        f. WiFiClientSecure
        j. ArduinoJson 
    3. Add ESP 8266 board in the IDE by adding it this to the preferences --> http://arduino.esp8266.com/stable/package_esp8266com_index.json

B. Uploading Sketches to ATMEGA + ESP 8266 Developer Board
    B.1 For ESP 8266 Board
        1. Select Board ESP 8266
        2. Modify Sketch Server.ino inside Server Folder
            a. ssd = YOUR WIFI SSD NAME
            b. password = YOUR WIFI PASSWORD
            c. serverUrl = YOUR SERVER URL
        3. Switch Mode --> SW5, SW6, SW7 ON, the rest are OFF to upload USB port to Board
        4. Switch Mode --> SW5, SW6 ON the rest are OFF to view the fetch data in JSON format
    B.2 For ATMEGA Board
        1. Select Board ATMEGA 2560
        2. Modify Sketch Parcel_Swift Ino
            a. ceiling_limit --> for bin limit to full in cm
            b. courierPasscode --> for correct bin entry to open collecting bin
        2. Switch Mode --> SW3, SW4, the rest are OFF to upload USB port to Board
        3. Upload the Sketch
        4. Switch Mode --> SW1, SW2, Sw3, SW4 to interact USD <-> ATMEGA <-> ESP 8266