[tooling] Upgrade to python 3.14

.basedpyright/baseline.json

@@ -11753,14 +11753,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/data_exchange_validation/get_op_data_validation.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 23,
-                    "endColumn": 35,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportOptionalMemberAccess",
                 "range": {
@@ -13429,14 +13421,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/dss/op_intent_ref_access_control.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 24,
-                    "endColumn": 36,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportArgumentType",
                 "range": {
@@ -13835,14 +13819,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/dss/op_intent_ref_state_transitions.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 24,
-                    "endColumn": 36,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportArgumentType",
                 "range": {
@@ -15849,14 +15825,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/flight_intent_validation/flight_intent_validation.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 23,
-                    "endColumn": 35,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportOptionalMemberAccess",
                 "range": {
@@ -16205,14 +16173,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/off_nominal_planning/down_uss.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 23,
-                    "endColumn": 35,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportAttributeAccessIssue",
                 "range": {
@@ -16247,14 +16207,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/off_nominal_planning/down_uss_equal_priority_not_permitted.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 33,
-                    "endColumn": 46,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportReturnType",
                 "range": {
@@ -16265,14 +16217,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/prep_planners.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 23,
-                    "endColumn": 35,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportArgumentType",
                 "range": {
@@ -16301,14 +16245,6 @@
             }
         ],
         "./monitoring/uss_qualifier/scenarios/astm/utm/subscription_notifications/receive_notifications_for_awareness/receive_notifications_for_awareness.py": [
-            {
-                "code": "reportAttributeAccessIssue",
-                "range": {
-                    "startColumn": 23,
-                    "endColumn": 35,
-                    "lineCount": 1
-                }
-            },
             {
                 "code": "reportOptionalMemberAccess",
                 "range": {

.github/workflows/ci.yml

@@ -28,6 +28,10 @@ jobs:
         fetch-tags: true
         fetch-depth: 0
         filter: tree:0
+    - name: Set up Python
+      uses: actions/setup-python@v7
+      with:
+        python-version: '3.14'
     - name: Build monitoring images
       run: |
         make image
@@ -123,11 +127,11 @@ jobs:
     - name: Set up Python
       uses: actions/setup-python@v7
       with:
-        python-version: '3.13'
+        python-version: '3.14'
     - name: Install uv
       uses: astral-sh/setup-uv@v7
       with:
-        version: '0.12.21'
+        version: '0.13.5'
         enable-cache: true
     - name: Run minimal benchmarker configuration
       shell: bash

monitoring/Dockerfile

@@ -36,7 +36,7 @@
 
 ARG BASE_STAGE=base-system
 
-FROM ghcr.io/astral-sh/uv:0.13.1-python3.13-trixie-slim AS base-system
+FROM ghcr.io/astral-sh/uv:0.13.5-python3.14-trixie-slim AS base-system
 # Not -alpine because: https://stackoverflow.com/a/58028091/651139
 
 # Install system tools

monitoring/benchmarker/artifacts/matplotlib/matplotlib_figure.py

@@ -37,7 +37,7 @@ def _extract_numbers(val) -> list[float]:
         return res
     try:
         return [float(val)]
-    except (ValueError, TypeError):
+    except ValueError, TypeError:
         return []
 
 

monitoring/benchmarker/reports/analysis.py

@@ -264,7 +264,7 @@ def from_data(
         x_data: Sequence[float],
         y_data: Sequence[float],
         discard_probability: float | None = 0.05,
-    ) -> "USLFit":
+    ) -> USLFit:
         x_arr = np.array(x_data, dtype=float)
         y_arr = np.array(y_data, dtype=float)
         if len(x_arr) != len(y_arr):

monitoring/mock_uss/ridsp/user_notifications.py

@@ -37,7 +37,7 @@ def record_notification(
             UserNotification(observed_at=observed_at_time, message=message)
         )
 
-    def create_notifications_if_needed(self, record: "database.TestRecord"):
+    def create_notifications_if_needed(self, record: database.TestRecord):
         for notif in check_and_generate_slow_update_notification(record.flights):
             self.record_notification("Insufficient update rate", notif)
 

monitoring/mock_uss/tracer/routes/ui.py

@@ -195,7 +195,7 @@ def tracer_observation_area_ui(observation_area_id: str):
     try:
         bbox = geo.make_latlng_rect(v)
         bbox_str = f"{bbox.lo().lat().degrees:6f},{bbox.lo().lng().degrees:6f},{bbox.hi().lat().degrees:6f},{bbox.hi().lng().degrees:6f}"
-    except (ValueError, KeyError):
+    except ValueError, KeyError:
         bbox_str = "[unavailable]"
     if v.altitude_lower:
         alt_lo = f"{v.altitude_lower.value} {v.altitude_lower.units} {v.altitude_lower.reference}"

monitoring/prober/conftest.py

@@ -191,6 +191,7 @@ def scd_session(pytestconfig) -> UTMClientSession:
 
 @pytest.fixture(scope="session")
 def scd_session_async(pytestconfig):
+    asyncio.set_event_loop(asyncio.new_event_loop())
     session = make_session_async(pytestconfig, "/dss/v1", "scd_auth1")
     yield session
     session.close()

monitoring/uss_qualifier/reports/artifacts.py

@@ -1,7 +1,7 @@
 import json
 import os
 import time
-from multiprocessing import Process
+from multiprocessing import get_context
 
 from implicitdict import ImplicitDict
 from loguru import logger
@@ -169,7 +169,10 @@ def make_ai_helpers() -> None:
         make_timing_report,
         make_ai_helpers,
     ]
-    generators = [Process(target=g, daemon=True) for g in artifact_generators]
+    generators = [
+        get_context("fork").Process(target=g, daemon=True)
+        for g in artifact_generators  # Note: fork is used, since make_* are not pickable
+    ]
     for p in generators:
         p.start()
     for p in generators:

monitoring/uss_qualifier/resources/dev/test_modifier.py

@@ -110,7 +110,7 @@ def get_extents(self) -> LatLngBoundingBox:
             west_meters=self.SQUARE_SIDE_M / 2,
         )
 
-    def move(self, meters_east: float, meters_north: float) -> "TestSquareResource":
+    def move(self, meters_east: float, meters_north: float) -> TestSquareResource:
         shifted = self.get_extents().expand(
             north_meters=meters_north,
             east_meters=meters_east,

monitoring/uss_qualifier/resources/flight_planning/flight_intents_resource.py

@@ -86,7 +86,7 @@ def get_extents(self) -> LatLngBoundingBox:
                 rect = rect.union(v4d.rect_bounds)
         return LatLngBoundingBox.from_latlng_rect(rect)
 
-    def move(self, meters_east: float, meters_north: float) -> "FlightIntentsResource":
+    def move(self, meters_east: float, meters_north: float) -> FlightIntentsResource:
 
         # Create a new copy
         new_spec = ImplicitDict.parse(

monitoring/uss_qualifier/resources/interuss/id_generator.py

@@ -37,7 +37,7 @@ def instance_index(self) -> int:
 
     def with_instance_index(
         self, instance_index: int, resource_origin: str | None = None
-    ) -> "IDGeneratorResource":
+    ) -> IDGeneratorResource:
         """Derive an independent generator, replacing rather than adding an index."""
         return IDGeneratorResource(
             specification=IDGeneratorSpecification(instance_index=instance_index),

monitoring/uss_qualifier/resources/planning_area.py

@@ -68,7 +68,7 @@ def get_extents(self) -> LatLngBoundingBox:
             self.resolved_volume4d_with_times(None, None).rect_bounds
         )
 
-    def move(self, meters_east: float, meters_north: float) -> "PlanningAreaResource":
+    def move(self, meters_east: float, meters_north: float) -> PlanningAreaResource:
         volume_spec = deepcopy(self._volume.specification)
         volume_spec.template.transformations = (
             volume_spec.template.transformations or []

monitoring/uss_qualifier/scenarios/astm/utm/versioning/evaluate_system_versions.py

@@ -183,7 +183,7 @@ def _evaluate_consistency(
             ):
                 try:
                     resp = ImplicitDict.parse(q.response.json, GetVersionResponse)
-                except (ValueError, KeyError):
+                except ValueError, KeyError:
                     # Something was wrong with the response payload; ignore this query
                     continue
                 with self.check(

monitoring/uss_qualifier/scenarios/interuss/unit_test.py

@@ -6,7 +6,7 @@
 
 
 class UnitTestScenario(GenericTestScenario):
-    def __init__(self, step_under_test: Callable[["UnitTestScenario"], None]):
+    def __init__(self, step_under_test: Callable[[UnitTestScenario], None]):
         self._allow_undocumented_checks = True
         self.step_under_test = step_under_test
         self.declaration = TestScenarioDeclaration(

monitoring/uss_qualifier/scenarios/scenario.py

@@ -309,7 +309,7 @@ def __init__(self):
     def make_test_scenario(
         declaration: TestScenarioDeclaration,
         resource_pool: dict[ResourceID, ResourceType],
-    ) -> "TestScenario":
+    ) -> TestScenario:
         scenario_type = get_scenario_type_by_name(declaration.scenario_type)
 
         constructor_signature = inspect.signature(scenario_type.__init__)

monitoring/uss_qualifier/suites/suite.py

@@ -174,12 +174,12 @@ def _run_test_scenario(self, context: ExecutionContext) -> TestScenarioReport:
             with scenario.async_runtime():
                 try:
                     scenario.run(context)
-                except (ScenarioCannotContinueError, TestRunCannotContinueError):
+                except ScenarioCannotContinueError, TestRunCannotContinueError:
                     pass
                 scenario.go_to_cleanup()
                 try:
                     scenario.cleanup()
-                except (ScenarioCannotContinueError, TestRunCannotContinueError):
+                except ScenarioCannotContinueError, TestRunCannotContinueError:
                     scenario.ensure_cleanup_ended()
         except KeyboardInterrupt:
             raise

pyproject.toml

@@ -6,7 +6,7 @@ authors = [
 ]
 description = "Monitoring framework to test UAS Service Suppliers"
 readme = "README.md"
-requires-python = ">=3.13"
+requires-python = ">=3.14"
 dependencies = [
     "aiohttp>=3.14.3",
     "arrow>=1.4.0",
@@ -66,7 +66,7 @@ exclude-newer = "P7D"
 exclude-newer-package = { uas-standards = false }
 
 [tool.ruff]
-target-version = "py313"
+target-version = "py314"
 extend-exclude = [
     "interfaces/*",
     "monitoring/prober/output/*",

scripts/git/get_version.py

@@ -243,7 +243,7 @@ def get_pep440_version(
     try:
         info = get_git_info(component)
         return derive_pep440_version(info)
-    except (subprocess.SubprocessError, FileNotFoundError, OSError):
+    except subprocess.SubprocessError, FileNotFoundError, OSError:
         pass
 
     if os.path.exists(VERSION_FILE_PATH):

test/repo_hygiene/Dockerfile

@@ -2,7 +2,7 @@
 #
 # `docker build` should be run from this folder
 
-FROM ghcr.io/astral-sh/uv:python3.13-alpine
+FROM ghcr.io/astral-sh/uv:python3.14-alpine
 
 ADD . /app
 WORKDIR /app

test/repo_hygiene/pyproject.toml

@@ -2,7 +2,7 @@
 name = "repo_hygiene"
 version = "0.1.0"
 readme = "README.md"
-requires-python = "==3.13.*"
+requires-python = "==3.14.*"
 dependencies = [
     "marko",
 ]