Missing Max Charge SOC

[thomasmillercf]

Hi is it possible to add Max Charge SOC.

I am looking for this option so i can automate turning this down and up when the sun is out so i do not charge batties but instead send out to the grid. As it cheaper for me to charge them at night then it is for me to store from the sun

[IM35461]

Indeed, since a firmware update on my Inverter options like setting the SOC and individual on/off switches for each timer are available but not in the HA App?

Any chance of a update so if you have the newer firmware it offers the extra options?

[abandyb]

I found this post because i was searching for details on the 'Timed Charge SOC N' and 'Timed Discharge SOC N' values which according to the https://github.com/hultenvp/solis-sensor#version-4b00-and-later home page, are available for versions 4B00 and later.

There is very little reading material about these settings and because my inverter is currently on version 4A00, I want to find out if I were to upgrade to 4B00 will these settings will be able to assert maximum SOC limits for charging and minimum SOC limits for discharging,

If this is indeed true, I am assuming I need to request a firmware update from Solis, and then I need to either restart my home assistant or re-add the solis-control integration

What has been your experience and did you get this resolved?

[IM35461]

I requested the Solis AI features (which I don't use) but the firmware update added the features.

https://solis-service.solisinverters.com/en/support/solutions/articles/44002688537-inverter-control-solis-ai-more

[abandyb]

I requested the Solis AI features (which I don't use) but the firmware update added the features.

https://solis-service.solisinverters.com/en/support/solutions/articles/44002688537-inverter-control-solis-ai-more

do you have the new feature in your HA integration yet?

[IM35461]

To get all the options I had to install both Solis HACS which then gives you some options twice.
Both installed is a supported option.

[abandyb]

To get all the options I had to install both Solis HACS which then gives you some options twice. Both installed is a supported option.

I followed your lead - upgraded my inverter firmware, restarted HA to get the new controls, then raised a new issue here to get the on/off switches added, and today installed the alternative HA integration which gives me exactly what i wanted

Thanks for taking the time to help - much appreciated !