dessmetal brings high-quality guitar sounds to your desktop. This application uses machine learning to mimic the behavior of real valve amplifiers. It provides the same response and tone as physical hardware without the need for expensive gear. You can use it as a standalone app to practice or as a plugin inside your music software.
You must visit the official releases page to get the installer. This page contains the most recent version of the software.
Click here to open the download page
Look for the section marked Assets. You will see files ending in .exe or .zip. Click the file that matches your Windows version. Most users should choose the 64-bit installer. Save the file to your desktop or your Downloads folder.
Follow these steps to set up the software on your Windows computer:
- Locate the file you saved in the previous step.
- Double-click the installer icon.
- If a security window appears, click More Info and then Run anyway.
- Follow the instructions on the screen.
- Click Finish when the process completes.
The software installs the standalone application and the VST3 plugin files. You can now open dessmetal from your Start menu or use it in your digital audio workstation.
Once you launch the app, you need to connect your hardware. The software needs an audio interface to process your guitar signal.
- Connect your guitar to the input on your audio interface.
- Open the Settings menu in the top corner of the app.
- Select your audio device from the list.
- Choose the input channel where you plugged in your guitar.
- Set your output to your headphones or speakers.
You should hear your guitar signal immediately. Adjust the input gain slider to avoid distortion at the clean stage. The neural model provides the drive you need. Use the parametric controls to shape the frequency response of the amp.
The interface provides three primary control areas:
- Input Gain: This adjusts the signal level entering the neural engine. Higher settings create more crunch and power tube saturation.
- Neural Model Selector: This allows you to choose different amp profiles. Each profile represents a specific type of vacuum tube amplifier.
- Parametric EQ: This section lets you change the tone. Use the frequency dial to pick a range and the gain dial to cut or boost that area.
If you record music, you can use dessmetal inside software like Ableton, Reaper, or FL Studio.
- Open your music software.
- Scan your plugin folder.
- Add a new instrument or effect track.
- Find dessmetal in your list of VST3 plugins.
- Load the plugin into your signal chain.
The settings you choose inside the plugin window save automatically with your project. You can record a dry track and change the amp sound later.
To run this software, ensure your computer meets these minimum specifications:
- Operating System: Windows 10 or Windows 11.
- Processor: Intel Core i5 or AMD Ryzen 5.
- RAM: 8GB of memory.
- Storage: 200MB of free space.
- Audio: A low-latency audio interface with correct drivers.
If you encounter silence, check your audio settings. Ensure the software selects the correct input. If the sound stutters, increase the buffer size in your audio interface control panel. A larger buffer reduces CPU load but adds a small delay to your playing. A smaller buffer provides a real-time feel but requires a faster processor.
If the application fails to launch, confirm that you installed the latest drivers for your audio hardware. Old drivers cause conflicts with audio plugins.
Keywords: amp-simulator, audio-plugin, audiodsp, auv2, guitar, guitar-amp, iplug2, machine-learning, macos, neural-amp-modeler, vst3