Master

Bash Scripts/ChkTemp.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+/usr/bin/tail -n1 /etc/heyu/JeeTempDecoder.dat > /tmp/JeeTempDecoder.dat
+read date time node command x y type seq goodFloor badFloor failNoiseCount rxRssi temperature voltage < /tmp/JeeTempDecoder.dat
+if [ "$temperature" -le "400" ]; then
+let "t = $temperature / 100"
+/usr/sbin/ssmtp itaide@googlemail.com << EOF
+To: John O'Hare <itaide@googlemail.com>
+#From: RasPi1-2 <raspi1-2@it-aide.net>
+Date: `date`
+Subject: RasPi1-2: Sandhurst Temperature is < $t�C on `date -R`
+Body: 
+/etc/heyu/JeeGasCounterDecoder.dat
+----------------------------------
+`tail /etc/heyu/JeeTempDecoder.dat`
+----------------------------------
+/etc/heyu/JeeRoomNodeDecoder.dat
+----------------------------------
+`tail /etc/heyu/JeeRoomNodeDecoder.dat`
+----------------------------------
+
+EOF
+fi

Bash Scripts/Jee18.sh

@@ -0,0 +1,94 @@
+#!/bin/bash
+# Garden Shed
+####################################################
+####################LOCKFILE########################
+LOCKDIR="/tmp/Jee18-lock"
+if mkdir "${LOCKDIR}" &>/dev/null; then
+####################################################
+yymmdd=`date "+%Y%m%d"`
+/usr/bin/tail -n1 /etc/heyu/Jee18.dat > /tmp/Jee18.dat               # /tmp is a ram disk on RPi
+read date time node light movement humidity temp  < /tmp/Jee18.dat   # Read back last data stored
+if [ "${yymmdd:6:2}" != "${date:8:2}" ] 
+  then
+  mv /etc/heyu/Jee18.dat /etc/heyu/archive/Jee18-${date:0:4}${date:5:2}${date:8:2}.dat
+  touch /etc/heyu/Jee18.dat
+  mv /etc/heyu/Jee18.skipped /etc/heyu/archive/Jee18-${date:0:4}${date:5:2}${date:8:2}.skipped
+  touch /etc/heyu/Jee18.skipped
+fi
+#echo `date "+%Y/%m/%d %X"` $@ >> ./JeeRoomNodeDecoder.txt
+	args=("$@")	# Assign to array
+# args0 1 2 3 4 5  6   7  8   9 10
+# OK 19 0 0 0 6 0 54 133 16 170 85 12 (71dB)
+#struct {					//0		Offset, node #
+#	byte command;			//1		ACK command return field
+#    byte missedACK	:4;		//2
+#    byte attempts	:4;		//2		Transmission attempts
+#	byte count		:4;		//3		Packet count 
+#    byte moved 		:1; //3		motion detector: 0..1
+#    byte lobat 		:1; //3		supply voltage dropped under 3.1V: 0..1
+#	byte spare2		:2;		//3    
+#if BME280_PORT
+#    uint32_t pressure:24;	//4&5&6
+#endif 	   
+#    byte light;     		//7		light sensor: 0..255
+#    unsigned int humi:16;	//8&9	humidity: 0..100.00
+#    int temp   		:16; //10&11	temperature: -5000..+5000 (hundredths)
+#} payload;
+#
+#     RoomNode
+#      19 0 15 0 87 140 1 0 87 2 185  8 115
+# args  0 1  2 3  4   5 6 7  8 9  10 11  12
+#
+
+let "node = ${args[0]}"	   # Get node number
+#let "node = $node & 31"   # strip ack/dst/ctl flags
+
+let "command = ${args[1]}" # Get command byte
+
+let "attempts = ${args[2]} >> 4" 
+let "missedACK = ${args[2]} & 15"
+
+let "movement = ${args[3]} & 128"
+let "battery = ${args[3]} & 64"
+
+let "count = ${args[3]}"
+#let "count = $count >> 1"
+#echo "Count10=$count"
+
+let "pressure = ${args[6]} << 8"
+let "pressure = $pressure + ${args[5]}"
+let "pressure = $pressure << 8"
+let "pressure = $pressure + ${args[4]}"
+
+let "light = ${args[7]}"
+
+let "humidity = ${args[9]} << 8"
+let "humidity = $humidity + ${args[8]}"
+#
+let "temp = ${args[11]} << 8"
+let "temp = temp + ${args[10]}"
+let temp=$(($temp<<48)); let temp=$(($temp>>48)) # Preserve signed number
+#
+# 149 == 4.06v
+# 108 is minimum that node stays active ~ 2.7v
+let "vcc = ${args[12]}"
+#
+echo $temp $humidity $pressure $vcc > /tmp/Jee18-BME280.temp
+#cp /tmp/BME280.temp /tmp/BME280.roomNode
+#
+echo `date "+%Y/%m/%d %X"` $node $light $command $attempts $missedACK $count $movement $battery $pressure $humidity $temp $vcc >> /etc/heyu/Jee18.dat
+#  
+#post "http://api.thingspeak.com/update?key=AG0FOXOMBA68DDOR&field1=$light&field2=$movement&field3=$humidity&field4=$temp&field5=$battery"
+
+if [[ $vcc -le 90 ]];
+	then 
+		who | awk '$1 == "john" { print $2 }' | while read pty; do echo "Sending to $pty"; echo $'\n'$'\x07'"Low Battery Node $node $vcc"  > /dev/$pty; done
+fi
+
+else
+ echo `date "+%Y/%m/%d %X"` $@ >> /etc/heyu/Jee18.skipped
+#################################################################
+rm -rf "${LOCKDIR}"
+fi
+#################################################################
+

Bash Scripts/Jee19.sh

@@ -0,0 +1,93 @@
+#!/bin/bash
+####################################################
+####################LOCKFILE########################
+LOCKDIR="/tmp/Jee19-lock"
+if mkdir "${LOCKDIR}" &>/dev/null; then
+####################################################
+yymmdd=`date "+%Y%m%d"`
+/usr/bin/tail -n1 /etc/heyu/Jee19.dat > /tmp/Jee19.dat               # /tmp is a ram disk on RPi
+read date time node light movement humidity temp  < /tmp/Jee19.dat                # Read back last data stored
+if [ "${yymmdd:6:2}" -ne "${date:8:2}" ] 
+  then
+  mv /etc/heyu/Jee19.dat /etc/heyu/archive/Jee19-${date:0:4}${date:5:2}${date:8:2}.dat
+  touch /etc/heyu/Jee19.dat
+  mv /etc/heyu/Jee19.skipped /etc/heyu/archive/Jee19-${date:0:4}${date:5:2}${date:8:2}.skipped
+  touch /etc/heyu/Jee19.skipped
+fi
+#echo `date "+%Y/%m/%d %X"` $@ >> ./JeeRoomNodeDecoder.txt
+	args=("$@")	# Assign to array
+# args0 1 2 3 4 5  6   7  8   9 10
+# OK 19 0 0 0 6 0 54 133 16 170 85 12 (71dB)
+#struct {					//0		Offset, node #
+#	byte command;			//1		ACK command return field
+#    byte missedACK	:4;		//2
+#    byte attempts	:4;		//2		Transmission attempts
+#	byte count		:4;		//3		Packet count 
+#    byte moved 		:1; //3		motion detector: 0..1
+#    byte lobat 		:1; //3		supply voltage dropped under 3.1V: 0..1
+#	byte spare2		:2;		//3    
+#if BME280_PORT
+#    uint32_t pressure:24;	//4&5&6
+#endif 	   
+#    byte light;     		//7		light sensor: 0..255
+#    unsigned int humi:16;	//8&9	humidity: 0..100.00
+#    int temp   		:16; //10&11	temperature: -5000..+5000 (hundredths)
+#} payload;
+#
+#     RoomNode
+#      19 0 15 0 87 140 1 0 87 2 185  8 115
+# args  0 1  2 3  4   5 6 7  8 9  10 11  12
+#
+
+let "node = ${args[0]}"	   # Get node number
+#let "node = $node & 31"   # strip ack/dst/ctl flags
+
+let "command = ${args[1]}" # Get command byte
+
+let "attempts = ${args[2]} >> 4" 
+let "missedACK = ${args[2]} & 15"
+
+let "movement = ${args[3]} & 8"
+let "battery = ${args[3]} & 4"
+
+let "count = ${args[3]}"
+#let "count = $count >> 1"
+#echo "Count10=$count"
+
+let "pressure = ${args[6]} << 8"
+let "pressure = $pressure + ${args[5]}"
+let "pressure = $pressure << 8"
+let "pressure = $pressure + ${args[4]}"
+
+let "light = ${args[7]}"
+
+let "humidity = ${args[9]} << 8"
+let "humidity = $humidity + ${args[8]}"
+#
+let "temp = ${args[11]} << 8"
+let "temp = $temp + ${args[10]}"
+let temp=$(($temp<<48)); let temp=$(($temp>>48)) # Preserve signed number
+#
+# 149 == 4.06v
+# 108 is minimum that node stays active ~ 2.7v
+let "vcc = ${args[12]}"
+#
+echo $temp $humidity $pressure $vcc > /tmp/BME280.temp
+echo $temp $humidity $pressure $vcc >/tmp/BME280.roomNode
+#
+echo `date "+%Y/%m/%d %X"` $node $light $command $attempts $missedACK $count $movement $battery $pressure $humidity $temp $vcc >> /etc/heyu/Jee19.dat
+#  
+#post "http://api.thingspeak.com/update?key=AG0FOXOMBA68DDOR&field1=$light&field2=$movement&field3=$humidity&field4=$temp&field5=$battery"
+
+if [[ $vcc -le 110 ]];
+	then 
+		who | awk '$1 == "john" { print $2 }' | while read pty; do echo "Sending to $pty"; echo $'\n'$'\x07'"Low Battery Node $node $vcc"  > /dev/$pty; done
+fi
+
+else
+ echo `date "+%Y/%m/%d %X"` $@ >> /etc/heyu/Jee19.skipped
+#################################################################
+rm -rf "${LOCKDIR}"
+fi
+#################################################################
+

Bash Scripts/Jee20.sh

@@ -0,0 +1,93 @@
+#!/bin/bash
+####################################################
+####################LOCKFILE########################
+LOCKDIR="/tmp/Jee18-lock"
+if mkdir "${LOCKDIR}" &>/dev/null; then
+####################################################
+yymmdd=`date "+%Y%m%d"`
+#/usr/bin/tail -n1 /etc/heyu/Jee18.dat > /tmp/Jee18.dat               # /tmp is a ram disk on RPi
+#read date time node light movement humidity temp  < /tmp/Jee18.dat                # Read back last data stored
+if [ "${yymmdd:6:2}" -ne "${date:8:2}" ] 
+  then
+  mv /etc/heyu/Jee18.dat /etc/heyu/archive/Jee18-${date:0:4}${date:5:2}${date:8:2}.dat
+  touch /etc/heyu/Jee18.dat
+  mv /etc/heyu/Jee18.skipped /etc/heyu/archive/Jee18-${date:0:4}${date:5:2}${date:8:2}.skipped
+  touch /etc/heyu/Jee18.skipped
+fi
+#echo `date "+%Y/%m/%d %X"` $@ >> ./JeeRoomNodeDecoder.txt
+	args=("$@")	# Assign to array
+# args0 1 2 3 4 5  6   7  8   9 10
+# OK 19 0 0 0 6 0 54 133 16 170 85 12 (71dB)
+#struct {					//0		Offset, node #
+#	byte command;			//1		ACK command return field
+#    byte missedACK	:4;		//2
+#    byte attempts	:4;		//2		Transmission attempts
+#	byte count		:4;		//3		Packet count 
+#    byte moved 		:1; //3		motion detector: 0..1
+#    byte lobat 		:1; //3		supply voltage dropped under 3.1V: 0..1
+#	byte spare2		:2;		//3    
+#if BME280_PORT
+#    uint32_t pressure:24;	//4&5&6
+#endif 	   
+#    byte light;     		//7		light sensor: 0..255
+#    unsigned int humi:16;	//8&9	humidity: 0..100.00
+#    int temp   		:16; //10&11	temperature: -5000..+5000 (hundredths)
+#} payload;
+#
+#     RoomNode
+#      19 0 15 0 87 140 1 0 87 2 185  8 115
+# args  0 1  2 3  4   5 6 7  8 9  10 11  12
+#
+
+let "node = ${args[0]}"	   # Get node number
+#let "node = $node & 31"   # strip ack/dst/ctl flags
+
+let "command = ${args[1]}" # Get command byte
+
+let "attempts = ${args[2]} >> 4" 
+let "missedACK = ${args[2]} & 15"
+
+let "movement = ${args[3]} & 8"
+let "battery = ${args[3]} & 4"
+
+let "count = ${args[3]}"
+#let "count = $count >> 1"
+#echo "Count10=$count"
+
+let "pressure = ${args[6]} << 8"
+let "pressure = $pressure + ${args[5]}"
+let "pressure = $pressure << 8"
+let "pressure = $pressure + ${args[4]}"
+
+let "light = ${args[7]}"
+
+let "humidity = ${args[9]} << 8"
+let "humidity = $humidity + ${args[8]}"
+#
+let "temp = ${args[11]} << 8"
+let "temp = $temp + ${args[10]}"
+let temp=$(($temp<<48)); let temp=$(($temp>>48)) # Preserve signed number
+#
+# 149 == 4.06v
+# 108 is minimum that node stays active ~ 2.7v
+let "vcc = ${args[12]}"
+#
+echo $temp $humidity $pressure $vcc > /tmp/Jee18-BME280.temp
+#cp /tmp/BME280.temp /tmp/BME280.roomNode
+#
+echo `date "+%Y/%m/%d %X"` $node $light $command $attempts $missedACK $count $movement $battery $pressure $humidity $temp $vcc >> /etc/heyu/Jee18.dat
+#  
+#post "http://api.thingspeak.com/update?key=AG0FOXOMBA68DDOR&field1=$light&field2=$movement&field3=$humidity&field4=$temp&field5=$battery"
+
+if [[ $vcc -le 110 ]];
+	then 
+		who | awk '$1 == "john" { print $2 }' | while read pty; do echo "Sending to $pty"; echo $'\n'$'\x07'"Low Battery Node $node $vcc"  > /dev/$pty; done
+fi
+
+else
+ echo `date "+%Y/%m/%d %X"` $@ >> /etc/heyu/Jee18.skipped
+#################################################################
+rm -rf "${LOCKDIR}"
+fi
+#################################################################
+

Bash Scripts/JeeActivity.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+if [ -f /tmp/seconds ] ;
+	then
+		read  lastLtime < /tmp/seconds
+		let "thisLtime = `date +%s` "
+		let "thisLtime = $thisLtime - 6 "
+		echo $lastLtime
+		echo $thisLtime
+		if [ $thisLtime -lt $lastLtime ] ;
+			then
+			echo "Less than"
+			else
+			echo "More than"
+		else
+			echo "jeebash.sh hasn't set /tmp/seconds" >> /etc/heyu/RFxConsole.txt
+		fi
+fi