MultiScale

projects/IoTBoardCode/Waspmote/TestingSensors/SCP1/readme.md

@@ -0,0 +1,174 @@
+## Tested the TeleContact gas and temperature sensors
+
+- Temperature sensor
+- SO2 sensor
+- NO2 sensor
+- used the SCP1 Plug and Sense station
+
+### Code used
+
+```
+/*
+    ------------  [SCP_v30_01] - Electrochemical gas sensors  --------------
+
+    Explanation: This is the basic code to manage and read an electrochemical
+    gas sensor with Smart Cities PRO board. Electrochemical sensor list:
+      - CO
+      - O2
+      - O3
+      - NO
+      - NO2
+      - SO2
+      - NH3
+      - H2
+      - H2S
+      - HCl
+      - HCN
+      - PH3
+      - ETO
+      - Cl2
+
+    Copyright (C) 2017 Libelium Comunicaciones Distribuidas S.L.
+    http://www.libelium.com
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+    Version:           3.2
+    Design:            David Gascón
+    Implementation:    Alejandro Gállego
+*/
+
+#include <WaspSensorCities_PRO.h>
+
+
+/*
+   Define object for sensor: gas_sensor
+   Input to choose board socket.
+   Waspmote OEM. Possibilities for this sensor:
+    - SOCKET_1
+    - SOCKET_3
+    - SOCKET_5
+   P&S! Possibilities for this sensor:
+    - SOCKET_B
+    - SOCKET_C
+    - SOCKET_F
+*/
+Gas gas_sensor(SOCKET_C);
+
+/*
+   Waspmote OEM. Possibilities for this sensor:
+    - SOCKET_1
+    - SOCKET_2
+    - SOCKET_3
+    - SOCKET_4
+    - SOCKET_5
+   P&S! Possibilities for this sensor:
+    - SOCKET_A
+    - SOCKET_B
+    - SOCKET_C
+    - SOCKET_E
+    - SOCKET_F
+*/
+bmeCitiesSensor bme(SOCKET_E);
+
+
+// variables
+float concentration;  // Stores the concentration level in ppm
+float temperature;  // Stores the temperature in ºC
+float humidity;   // Stores the realitve humidity in %RH
+float pressure;   // Stores the pressure in Pa
+
+
+void setup()
+{
+  USB.println(F("Electrochemical gas sensor example"));
+  USB.println(F("A BME sensor in socket A is also required"));
+}
+
+
+void loop()
+{
+
+  ///////////////////////////////////////////
+  // 1. Read Temperature, humidity and pressure sensor (BME)
+  ///////////////////////////////////////////
+
+  // switch off gas sensor for better performance
+  gas_sensor.OFF();
+  // switch on BME sensor (temperature, humidity and pressure)
+  bme.ON();
+
+  // Read enviromental variables
+  temperature = bme.getTemperature();
+  humidity = bme.getHumidity();
+  pressure = bme.getPressure();
+
+  // switch off BME sensor (temperature, humidity and pressure)
+  bme.OFF();
+  // switch on gas sensor again
+  gas_sensor.ON();
+
+
+  ///////////////////////////////////////////
+  // 2. Read gas sensor
+  ///////////////////////////////////////////
+
+  // Wait heating time
+  // some sensors demand at least one minute 
+  // of heating time after switching them on
+  USB.println(F("Enter deep sleep mode to wait for electrochemical heating time..."));
+  PWR.deepSleep("00:00:02:00", RTC_OFFSET, RTC_ALM1_MODE1, ALL_ON);
+  USB.ON();
+  USB.println(F("wake up!!"));
+
+  // Read the electrochemical sensor and compensate with the temperature internally
+  concentration = gas_sensor.getConc(temperature);
+
+  // And print the values via USB
+  USB.println(F("***************************************"));
+  USB.print(F("Gas concentration: "));
+  USB.printFloat(concentration, 3);
+  USB.println(F(" ppm"));
+  USB.print(F("Temperature: "));
+  USB.printFloat(temperature, 3);
+  USB.println(F(" Celsius degrees"));
+  USB.print(F("RH: "));
+  USB.printFloat(humidity, 3);
+  USB.println(F(" %"));
+  USB.print(F("Pressure: "));
+  USB.printFloat(pressure, 3);
+  USB.println(F(" Pa"));
+  USB.println(F("***************************************"));
+
+
+  ///////////////////////////////////////////
+  // 3. Sleep
+  ///////////////////////////////////////////
+
+  // Go to deepsleep
+  // After 2 minutes, Waspmote wakes up thanks to the RTC Alarm
+  USB.println(F("Enter deep sleep mode"));
+  PWR.deepSleep("00:00:02:00", RTC_OFFSET, RTC_ALM1_MODE1, ALL_ON);
+  USB.ON();
+  USB.println(F("wake up!!"));
+
+}
+
+```
+### Output
+SO2 sensor readings
+<p align = "center"><img src = "./images/serialout_SO2.png"></p>
+
+NO2 sensor readings
+<p align = "center"><img src = "./images/serialout_NO2.png"></p>

projects/MultiScale/README.md

@@ -0,0 +1,25 @@
+# Libelium_Cloud
+<b>
+MultiScale P&S stations
+Model: Waspmote Plug&Sense! 4G EU/BR - Smart Water Ions - ID: 66641CEB19623C42
+Model: Waspmote Plug&Sense! 4G EU/BR - Smart Water - ID: 444FB2C2CB0180A8 
+Model: Waspmote Plug&Sense! 4G EU/BR - Smart Agriculture Xtreme - ID: 603F18FDC337DEB1
+Model: Meshlium Scanner 4G AP EU - ID: 21347114350007 - WiFi AP ESSID: meshlium716c  
+</b>
+
+<h3>1. Libelium Cloud</h3>
+The Libelium devices are registered in the Libelium Cloud platform.
+Link here https://cloud.libelium.com/app/home
+
+<p align = "center"><img src = "./images/LibeliumCloud.png"></p>
+<br>
+
+<h3>2. SmartData System platform</h3>
+The Smart Agro Xtreme station is already registered in the platform, should be configured to send data in to SmartData platform. 
+Link here https://app.smartdatasystem.es/?target=auth 
+
+<p align = "center"><img src = "./images/SmartDataSystem.png"></p>
+<br>
+
+
+