Some Configs for the TwoTrees Sapphire Plus
- Sapphire-Plus-Cura-Profile.3mf -- Ultimaker Cura Profil Std. from TwoTrees
- robin_nano35_cfg.txt -- Original Config for Sapphire Plus dual Z-Motor + Belt-Sync and one Z-Stop Version "V3", ready to write your own MKS Firmware
- sapphire_plus_herbstleyd_prusaslicer.ini -- Prusaslicer Profile for Sapphire Plus
- The config file "robin_nano35_cfg.txt" can be used to build a "stock" and original Firmware at: https://baizhongyun.cn/home/mkstoolview
- Visit the site, choose at "Board series" "MKS Robin series" -- at "Board Type" "MKS Robin Nano V1.x-TFT35" -- at "Firmware Type" choose "MKS Robin Nano Firmware 2.0.x"
- (optional) At the next step you can add a new Bootscreen to your Printer, just click on the pictures.
- To load the right settings for our Sapphire Plus (Version V3, look at WTF?!) you go to "Configuration File" next to "Display UI" and "Export"
- Click at "Import file" and choose the robin_nano35_cfg.txt
- All necessary setting for the Sapphire Plus will be loaded and can be changed after your gusto. Like E-Steps an so on.
- If you dont change any settings you get a pure, stock firmware for your printer
- Just click "Export" and set all Options. Unzip the Files, copy it on a SD-Card, put it in the printer and "Engage!"
- Power on the printer and wait for install.
- Have fun and happy printing!
- But you can just use THIS: https://github.com/herbstleyd/TwoTrees-Sapphire-Plus-Firmware---MKS-Std -- It´s my ready to use MKS Firmware for the Sapphire Plus V3
- I really want to dive deeper in the Marlin Firmware story on the MKS Nano Boards. But i cant flash my Board in my Printer all the time. I need a spare Board with Display for the development. If u have a spare coin, send it via PayPay at https://paypal.me/TheoRadical?country.x=DE&locale.x=de_DE
- Thank You!