initial commit

docs/learning/datax-industrial-demo/index.rst

@@ -0,0 +1,57 @@
+DEMO ADI DataX AI-driven 10BASE-T1L Deployment
+===============================================================================
+
+Deploying a functional 10BASE-T1L network for industrial applications requires navigating firmware builds, board-specific configurations, IP assignment, and multi-device coordination - an expertise barrier that constrains adoption despite the technology's inherent advantages in delivering power and data over a single twisted pair. ADI addresses this with a complete reference platform combining hardware, software, and agentic AI to streamline industrial network deployment through intelligent automation.
+
+This demonstration presents a complete 10BASE-T1L reference architecture spanning five board types across four network subnets. ADI DataX components such as no-OS, libiio, pyadi-iio, integrated with a Claude-based AI agent, automate end-to-end system bring-up, substantially reducing manual integration overhead through a structured, reproducible workflow:
+
+- AD-RPI-T1L-PSE provides power sourcing and serves as the network entry point
+
+- AD-SWIOT1L-SL operates as the T1L field device with configurable I/O and sensor interfaces
+
+- AD-APARD32690-SL with AD-APARDSPOE-SL and AD-APARDPFW-SL shields provides application processing, power forwarding, and network extension
+
+- CN0575 extends the network as an additional T1L node
+
+- The AI agent orchestrates firmware builds, flash sequencing, IP assignment, interface configuration, and connectivity verification across all nodes
+
+As a proof of concept, a table-top scale sorting conveyor belt is designed to operate on the fully configured network, validating the deployment stack from unconfigured hardware to a running industrial application – highlighting a repeatable, production-ready path to 10BASE-T1L adoption.
+
+Resources
+-------------------------------------------------------------------------------
+
+- no-OS branch: :git-no-os:`adi_datax_10baset1l_demo <adi_datax_10baset1l_demo:>`
+- pyadi-iio branch: :git-pyadi-iio:`adi_datax_10baset1l_demo <adi_datax_10baset1l_demo:>`
+- Claude-based AI agent: :git-ai-agent:`adi_datax_10baset1l_demo <adi_datax_10baset1l_demo:>`
+- Application code for conveyor belt demo: :git-conveyor:`adi_datax_10baset1l_demo <adi_datax_10baset1l_demo:>`
+- Kuiper Linux branch: :git-kuiper:`adi_datax_10baset1l_demo <adi_datax_10baset1l_demo:>`
+
+Block diagram
+-------------------------------------------------------------------------------
+.. figure:: block.drawio.png
+   :align: center
+   :width: 900
+
+Demo description
+-------------------------------------------------------------------------------
+The Raspberry Pi 4 with the AD-RPI-T1LPSE-SL hat runs Kuiper Linux and serves as the main 
+controlling unit to three network segments. The AD-SWIOT1L-SL board is connected to the main
+RPi using T1L-to-USB on eth1, the two AD-APARD32690 with AD-APARDSPOE-SL shield and AD-
+APARDPFWD-SL shield are daisy-chained and share eth2 on the same subnet. T
+he second RPi with EVAL-CN0575-RPIZ conects via eth3. 
+All links use 10BASE-T1L for industrial connectivity.
+
+System Capabilities
+-------------------------------------------------------------------------------
+
+Required Hardware
+-------------------------------------------------------------------------------
+
+SD Card Configuration
+----------------------------------------------------------------------------
+
+Software Setup
+-------------------------------------------------------------------------------
+
+Demo Features
+-------------------------------------------------------------------------------

docs/learning/index.rst

@@ -6,6 +6,7 @@ Learning! Tutorials, Workshops, Etc
 
    demo_hp_analog_meets_ai/index
    an_industrial_story/index
+   datax-industrial-demo/index
 
 Mixed Signal Basics
 -------------------------------------------------------------------------------