analogdevicesinc · CiprianRegus · Jul 28, 2026
diff --git a/docs/solutions/reference-designs/eval-adin1320fmcz/eval-adin1320fmcz.jpeg b/docs/solutions/reference-designs/eval-adin1320fmcz/eval-adin1320fmcz.jpeg
diff --git a/docs/solutions/reference-designs/eval-adin1320fmcz/index.rst b/docs/solutions/reference-designs/eval-adin1320fmcz/index.rst
@@ -0,0 +1,94 @@
+.. _eval-adin1320fmcz:
+
+EVAL-ADIN1320FMCZ
+=================
+
+ADIN1320 PHY Evaluation Board.
+
+.. figure:: eval-adin1320fmcz.jpeg
+   :align: right
+   :width: 300
+
+The :adi:`EVAL-ADIN1320FMCZ` evaluation board enables quick and easy evaluation
+of Analog Devices' :adi:`ADIN1320`, a low power, single port, multi-speed
+industrial Ethernet transceiver supporting RMII/MII to Copper or Fiber
+operation.
+
+The ADIN1320 combines an Energy Efficient Ethernet PHY core with all associated
+analog circuitry, clock buffering, management interface, and MAC interface
+control logic. The PHY supports MII, RGMII (including internal delay variants),
+and RMII host interfaces, and can operate over either a standard copper (RJ45)
+or fiber (SFP) medium.
+
+Overview
+--------
+
+The following carriers are supported, followed by the target firmware:
+
+.. list-table::
+
+   * - Carrier
+     - Linux
+   * - Zedboard (Zynq-7000)
+     - ✓
+
+Features
+~~~~~~~~
+
+* Single port 10/100/1000 Mb industrial Ethernet transceiver
+* MII, RMII, RGMII (with optional internal RX/TX delay) host interfaces
+* Selectable copper (RJ45) or fiber (1000BASE-X, 1000BASE-KX, 100BASE-FX) media
+* PHY address and operating mode (line and MAC interface selection) configured via on-board hardware strapping
+
+Evaluation board kit contents
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* ADIN1320EBZ-U1 evaluation board
+* LPC FMC to GPIO converter
+
+Equipment needed
+~~~~~~~~~~~~~~~~~
+
+* Zedboard - Zynq-7000 development board
+* Cat5+ Ethernet cable or a 1000BASE-X capable SFP module
+* SD card
+
+User Guides
+-----------
+
+.. toctree::
+   :titlesonly:
+   :glob:
+
+   user-guide/*
+
+Developers
+-----------
+
+Drivers
+~~~~~~~
+
+.. list-table::
+
+   * - Firmware
+     - Source code
+     - Documentation
+   * - Linux
+     - :git-linux:`drivers/net/phy/adin.c`
+     - :git-linux:`Documentation/devicetree/bindings/net/adi,adin.yaml`
+
+.. note::
+
+   The ADIN1320 is supported by the mainline ``adin`` PHY driver, shared with
+   the ADIN1200/ADIN1300 family. No ADIN1320-specific driver changes are
+   required.
+
+Help and Support
+-----------------
+
+For questions and more information, please visit:
+
+* :ez:`EngineerZone Support Community <reference-designs>`
+* :adi:`ADIN1320 Product Page <ADIN1320>`
+
+.. esd-warning::
diff --git a/...solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_overview.jpeg b/...solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_overview.jpeg
diff --git a/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_p0.jpeg b/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_p0.jpeg
diff --git a/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_power.jpeg b/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_power.jpeg
diff --git a/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_setup.jpeg b/docs/solutions/reference-designs/eval-adin1320fmcz/user-guide/adin1320_setup.jpeg