MiniUPnPd - Lease script version

This is a fork from miniupnp/miniupnpd allowing to execute a shell script when an UPnP leasing operation is performed (similar to dnsmasq's lease script option). This allows you to track UPnP leases a little easier.

Table of Contents

• MiniUPnPd - Lease script version
  • Table of Contents
  • Getting started
    • Usage
    • Example of use
  • Installation
• Original README

Getting started

Usage

In your miniunp.conf configuration file, specify the path to the shell script you want to execute upon an UPnP lease or configuration change with lease_script=<path> option.

Whenever a new UPnP lease is created, or an old one destroyed, the executable specified by this option is run. <path> must be an absolute pathname, no PATH search occurs. In that specific order, the arguments to the process are:

• up (update operation), add (new port mapping), del (delete operation);
• The wan port to which the service is mapped to;
• The protocol code;
• The lan address to the host of the service;
• The lan port to the service;
• A description of the port forwarding rule that has been executed.

Example of use

You may find an example a miniupnp.conf configuration file in examples/mqttpub. This example requires mosquitto_pub to be installed on your machine, and a mqtt broker to run on your local environment.

Assuming you copied the mqttpub.sh script to your local /tmp directory, executing miniupnp with the example configuration file will publish a new mqtt message to your broker's network/upnp topic each time a new uPnP operation is performed.

Installation

These instructions will get you a copy of the project up and running on your local machine for development and testing purposes. See deployment for notes on how to deploy the project on a live system.

1. Refer to the INSTALL file for installation;

2. Prior to building the project (make -f Makefile.linux), make sure you have the following flag enabled in your config.h file:

#define ENABLE_LEASESCRIPT

• Alternatively, using the genconfig.sh script (cross-compilation / Buildroot / OpenWRT builds), the option is enabled along with the --leasefile flag.

Original README

MiniUPnP project (c) 2006-2017 Thomas Bernard webpage: http://miniupnp.free.fr/ or https://miniupnp.tuxfamily.org/ github: https://github.com/miniupnp/miniupnp freecode: http://freecode.com/projects/miniupnp contact: miniupnp@free.fr

This directory contain the miniUPnP daemon software, aka miniUPnPd. This software is subject to the conditions detailed in the LICENSE file provided with this distribution.

The miniUPnP daemon is an UPnP IGD (internet gateway device) which provide NAT traversal services to any UPnP enabled client on the network. See http://www.upnp.org/ for more details on UPnP. During the year 2011, support for IGD v2 has been added. In 2012, IGD v2 WANIPv6FirewallControl has been implemented.

IGD2 is still not enabled by default because of interoperability issues.

In addition to UPnP IGD, miniUPnPd supports NAT-PMP and PCP :

See information about NAT Port Mapping Protocol (NAT-PMP) here : http://miniupnp.free.fr/nat-pmp.html NAT-PMP is the precursor of Port Control Protocol (PCP, RFC 6887). In 2013, support for PCP has been added too.

Read the INSTALL file for instructions to compile, install and configure miniupnpd on your system.

Report bugs to miniupnp@free.fr or on the web forum https://miniupnp.tuxfamily.org/forum/ or using https://github.com/miniupnp/miniupnp/issues

Thomas Bernard