Skip to content

Add files via upload #4

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
talented-adverb wants to merge 1 commit into
base: main
Choose a base branch
from
Open

Add files via upload #4

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
189 changes: 189 additions & 0 deletions Load_4_Integrated_with_SD/Load_4_Integrated_with_SD.ino
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,189 @@
#include <HX711_ADC.h>
#include <EEPROM.h>
#include<SD.h>
#include<SPI.h>

#define MOSI 51
#define MISO 50
#define SCK 52
#define CS 53

File myFile;

//pins:
const int HX711_dout1 = 4; //mcu > HX711 dout pin
const int HX711_sck1 = 5; //mcu > HX711 sck pin
const int HX711_dout2 = 6;
const int HX711_sck2 = 7;
const int HX711_dout3 = 8;
const int HX711_sck3 = 9;
const int HX711_dout4 = 10;
const int HX711_sck4 = 11;
//HX711 constructor:
HX711_ADC LoadCell1(HX711_dout1, HX711_sck1);
HX711_ADC LoadCell2(HX711_dout2, HX711_sck2);
HX711_ADC LoadCell3(HX711_dout3, HX711_sck3);
HX711_ADC LoadCell4(HX711_dout4, HX711_sck4);

const int calVal_eepromAdress = 0;
unsigned long t1 = 0;
unsigned long t2 = 0;
unsigned long t3 = 0;
unsigned long t4 = 0;

void setup() {
Serial.begin(57600); delay(10);
Serial.println();
Serial.println("Starting...");

LoadCell1.begin();
LoadCell2.begin();
LoadCell3.begin();
LoadCell4.begin();

//LoadCell.setReverseOutput(); //uncomment to turn a negative output value to positive
float calibrationValue1,calibrationValue2,calibrationValue3,calibrationValue4; // calibration value (see example file "Calibration.ino")
calibrationValue1 = 21.37; //Set the calibration value for each load cell
calibrationValue2 = -21.55;
calibrationValue3 = 20.69;
calibrationValue4 = -21.5;
#if defined(ESP8266)|| defined(ESP32)
//EEPROM.begin(512); // uncomment this if you use ESP8266/ESP32 and want to fetch the calibration value from eeprom
#endif
//EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom

unsigned long stabilizingtime1 = 2000; // preciscion right after power-up can be improved by adding a few seconds of stabilizing time
unsigned long stabilizingtime2 = 2000;
unsigned long stabilizingtime3 = 2000;
unsigned long stabilizingtime4 = 2000;

boolean _tare1 = true; //set this to false if you don't want tare to be performed in the next step
boolean _tare2 = true;
boolean _tare3 = true;
boolean _tare4 = true;


LoadCell1.start(stabilizingtime1, _tare1);
LoadCell2.start(stabilizingtime2, _tare2);
LoadCell3.start(stabilizingtime3, _tare3);
LoadCell4.start(stabilizingtime4, _tare4);


if (LoadCell1.getTareTimeoutFlag() && LoadCell2.getTareTimeoutFlag() && LoadCell3.getTareTimeoutFlag() && LoadCell4.getTareTimeoutFlag()) {
Serial.println("Timeout, check MCU>HX711 wiring and pin designations");
while (1);
}
else {
LoadCell1.setCalFactor(calibrationValue1); // set calibration value (float)
LoadCell2.setCalFactor(calibrationValue2);
LoadCell3.setCalFactor(calibrationValue3);
LoadCell4.setCalFactor(calibrationValue4);
Serial.println("Startup is complete");
}

if(!SD.begin()){
Serial.println("Card Initialization Failed");
return 0 ;
}

// if (myFile) {
// Serial.println("Writing to file...");
// }
// else {
// Serial.println("error opening file");
// }
}
void loop() {
String Data="";

static boolean newDataReady1 = 0;
static boolean newDataReady2 = 0;
static boolean newDataReady3 = 0;
static boolean newDataReady4 = 0;

const int serialPrintInterval = 0; //increase value to slow down serial print activity

// check for new data/start next conversion:
if (LoadCell1.update()) newDataReady1 = true;
if (LoadCell2.update()) newDataReady2 = true;
if (LoadCell3.update()) newDataReady3 = true;
if (LoadCell4.update()) newDataReady4 = true;

// get smoothed value from the dataset:
if (newDataReady1 && newDataReady2 && newDataReady3 && newDataReady4) {
if (millis() > t1 + serialPrintInterval && millis() > t2 + serialPrintInterval && millis() > t3 + serialPrintInterval && millis() > t4 + serialPrintInterval) {
float i = LoadCell1.getData();
float j = LoadCell2.getData();
float k = LoadCell3.getData();
float l = LoadCell4.getData();

Data+="Load_cell output val1: ";
Data+=String(i);
Data+="g,";
Data+="Load_cell output val2: ";
Data+=String(j);
Data+="g,";
Data+="Load_cell output val3: ";
Data+=String(k);
Data+="g,";
Data+="Load_cell output val4: ";
Data+=String(l);
Data+="g";
newDataReady1 = 0;
newDataReady2 = 0;
newDataReady3 = 0;
newDataReady4 = 0;
t1=t2=t3=t4= millis();
myFile = SD.open("LoadCellData.txt", FILE_WRITE);
if(myFile){
myFile.println(Data);
myFile.close();
Serial.println(Data);
}
else{
Serial.println("Error while opening file\n");
}
}
}

// receive command from serial terminal, send 't1'|'t2'|'t3' to initiate tare operation:
if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't1') LoadCell1.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't2') LoadCell2.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't3') LoadCell3.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't4') LoadCell4.tareNoDelay();
}

// check if last tare operation is complete:

if (LoadCell1.getTareStatus() == true) {
Serial.println("Tare1 complete");
}

if (LoadCell2.getTareStatus() == true) {
Serial.println("\tTare2 complete");
}

if (LoadCell3.getTareStatus() == true) {
Serial.println("Tare3 complete");
}

if (LoadCell4.getTareStatus() == true) {
Serial.println("\tTare4 complete");
}


}
179 changes: 179 additions & 0 deletions Loadcell_4_Integrated/Loadcell_4_Integrated.ino
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,179 @@
/*
-------------------------------------------------------------------------------------
HX711_ADC
Arduino library for HX711 24-Bit Analog-to-Digital Converter for Weight Scales
Olav Kallhovd sept2017
-------------------------------------------------------------------------------------
*/

/*
Settling time (number of samples) and data filtering can be adjusted in the config.h file
For calibration and storing the calibration value in eeprom, see example file "Calibration.ino"

The update() function checks for new data and starts the next conversion. In order to acheive maximum effective
sample rate, update() should be called at least as often as the HX711 sample rate; >10Hz@10SPS, >80Hz@80SPS.
If you have other time consuming code running (i.e. a graphical LCD), consider calling update() from an interrupt routine,
see example file "Read_1x_load_cell_interrupt_driven.ino".

This is an example sketch on how to use this library
*/

#include <HX711_ADC.h>
#if defined(ESP8266)|| defined(ESP32) || defined(AVR)
#include <EEPROM.h>
#endif

//pins:
const int HX711_dout1 = 4; //mcu > HX711 dout pin
const int HX711_sck1 = 5; //mcu > HX711 sck pin
const int HX711_dout2 = 6;
const int HX711_sck2 = 7;
const int HX711_dout3 = 8;
const int HX711_sck3 = 9;
const int HX711_dout4 = 10;
const int HX711_sck4 = 11;
//HX711 constructor:
HX711_ADC LoadCell1(HX711_dout1, HX711_sck1);
HX711_ADC LoadCell2(HX711_dout2, HX711_sck2);
HX711_ADC LoadCell3(HX711_dout3, HX711_sck3);
HX711_ADC LoadCell4(HX711_dout4, HX711_sck4);

const int calVal_eepromAdress = 0;
unsigned long t1 = 0;
unsigned long t2 = 0;
unsigned long t3 = 0;
unsigned long t4 = 0;
// unsigned long t3 = 0;

void setup() {
Serial.begin(57600); delay(10);
Serial.println();
Serial.println("Starting...");

LoadCell1.begin();
LoadCell2.begin();
LoadCell3.begin();
LoadCell4.begin();
//LoadCell.setReverseOutput(); //uncomment to turn a negative output value to positive
float calibrationValue1,calibrationValue2,calibrationValue3,calibrationValue4; // calibration value (see example file "Calibration.ino")
calibrationValue1 = 21.37; // uncomment this if you want to set the calibration value in the sketch
calibrationValue2 = -21.55;
calibrationValue3 = 20.69;
calibrationValue4 = -21.5;
#if defined(ESP8266)|| defined(ESP32)
//EEPROM.begin(512); // uncomment this if you use ESP8266/ESP32 and want to fetch the calibration value from eeprom
#endif
//EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom

unsigned long stabilizingtime1 = 2000; // preciscion right after power-up can be improved by adding a few seconds of stabilizing time
unsigned long stabilizingtime2 = 2000;
unsigned long stabilizingtime3 = 2000;
unsigned long stabilizingtime4 = 2000;

boolean _tare1 = true; //set this to false if you don't want tare to be performed in the next step
boolean _tare2 = true;
boolean _tare3 = true;
boolean _tare4 = true;


LoadCell1.start(stabilizingtime1, _tare1);
LoadCell2.start(stabilizingtime2, _tare2);
LoadCell3.start(stabilizingtime3, _tare3);
LoadCell4.start(stabilizingtime4, _tare4);


if (LoadCell1.getTareTimeoutFlag() && LoadCell2.getTareTimeoutFlag() && LoadCell3.getTareTimeoutFlag() && LoadCell4.getTareTimeoutFlag()) {
Serial.println("Timeout, check MCU>HX711 wiring and pin designations");
while (1);
}
else {
LoadCell1.setCalFactor(calibrationValue1); // set calibration value (float)
LoadCell2.setCalFactor(calibrationValue2);
LoadCell3.setCalFactor(calibrationValue3);
LoadCell4.setCalFactor(calibrationValue4);
Serial.println("Startup is complete");
}
}
void loop() {
static boolean newDataReady1 = 0;
static boolean newDataReady2 = 0;
static boolean newDataReady3 = 0;
static boolean newDataReady4 = 0;

const int serialPrintInterval = 0; //increase value to slow down serial print activity

// check for new data/start next conversion:
if (LoadCell1.update()) newDataReady1 = true;
if (LoadCell2.update()) newDataReady2 = true;
if (LoadCell3.update()) newDataReady3 = true;
if (LoadCell4.update()) newDataReady4 = true;

// get smoothed value from the dataset:
if (newDataReady1 && newDataReady2 && newDataReady3 && newDataReady4) {
if (millis() > t1 + serialPrintInterval && millis() > t2 + serialPrintInterval && millis() > t3 + serialPrintInterval && millis() > t4 + serialPrintInterval) {
float i = LoadCell1.getData();
float j = LoadCell2.getData();
float k = LoadCell3.getData();
float l = LoadCell4.getData();

Serial.print("Load_cell output val1: ");
Serial.print(i);
Serial.print("g");
Serial.print("\tLoad_cell output val2: ");
Serial.print(j);
Serial.print("g");
Serial.print("\tLoad_cell output val3: ");
Serial.print(k);
Serial.print("g");
Serial.print("\tLoad_cell output val4: ");
Serial.print(l);
Serial.println("g");
newDataReady1 = 0;
newDataReady2 = 0;
newDataReady3 = 0;
newDataReady4 = 0;

t1=t2=t3=t4= millis();
}
}

// receive command from serial terminal, send 't1'|'t2'|'t3' to initiate tare operation:
if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't1') LoadCell1.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't2') LoadCell2.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't3') LoadCell3.tareNoDelay();
}

if (Serial.available() > 0) {
char inByte = Serial.read();
if (inByte == 't4') LoadCell4.tareNoDelay();
}

// check if last tare operation is complete:
if (LoadCell1.getTareStatus() == true) {
Serial.println("Tare1 complete");
}

if (LoadCell2.getTareStatus() == true) {
Serial.println("\tTare2 complete");
}

if (LoadCell3.getTareStatus() == true) {
Serial.println("Tare3 complete");
}

if (LoadCell4.getTareStatus() == true) {
Serial.println("\tTare4 complete");
}


}