Repository files navigation Real Time Video Processing and EDGE DETECTION BOARD USED : ZEDBOARD _ ZYNQ 7000 This code doesnt run diretly Instantiation of BRAM is required Proccedure Click on IP Catalog Search for block memory generator Input depth - 640 x 480 = 307200 Make sure it is selected as always enabled This should also be done for B should be always enabled CAUTION - DO UNCHECK Output as primitive register or else it won't run Instantiation of Clock Wizard is required Proccedure Click on IP Catalog select name to clock_wiz_1 Remove the Locked and Reset as they are always enabled Need to Remove debouncing of the cam start as it is creating timing problems with the sccb_master asynchronous fifo can also be removed if we choose to use 24mhz for all the processing modules and leaving 25mhz for vga make sure CLOCK_DEDICATED_ROUTE IS FALSE OR ELSE IT WONT WORK GIVES SYNTHESIS ERRORS P16 alloted for RESET [BTNC] N15 alloted for decreasing_threshold [BTNL] R15 alloted for increasing threshold [BTNR] Also added GrayScale to Edge Detection conversion on a switch but doesnt work until reset is pressed consequently Once done it will be added and uploaded
You can’t perform that action at this time.