4. Custom Camera Setup
For 5M-series printers, stock FlashForge cameras are detected automatically whenever the printer reports a cameraStreamUrl — you do not need to enable any custom camera setting for an official FlashForge camera.
If you disable the printer-side camera in firmware, FlashForgeUI will treat the camera as unavailable until it is re-enabled on the printer.
For a separate custom RTSP or HTTP camera, open the Settings menu → Camera tab and enable Custom Camera, then paste the full camera URL into the camera URL box. You will then be able to view it from both the Desktop and the WebUI.
These settings are saved per-printer.
