SimplrSSH v1.4.12

SimplrSSH v1.4.12

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.12-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.12-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.12-release.bin
  

SHA-256: 72c09f46c49ae87209208ec0ca3fd7cee88be8b272bf91902dc516ca1caa9188 (also in SimplrSSH-v1.4.12-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.12-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.12-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.12-release.bin above.

SHA-256: 4e2e0a8d36dabff37b753d0f6f21778ec6027b0623f780b671dd05a7df5c389a (also in SimplrSSH-v1.4.12-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.12-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

• Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
  add SimplrSSH-Tab5-v1.4.12-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.12-release.bin
  

SHA-256: 1b4e1699d0b284546f0e899da4a7331fcbff55730d1319e26e404e1d0120c0a8 (also in SimplrSSH-Tab5-v1.4.12-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.12-launcher.bin from the SD card instead.
SHA-256: 73510da074552d92b2bb4f02babf45f9ca873ad87a84639b5713a303cc7121fa (also in SimplrSSH-Tab5-v1.4.12-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

• Integration by @bluenevus in #16

Full Changelog: v1.4.11...v1.4.12

SimplrSSH v1.4.11

SimplrSSH v1.4.11

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.11-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.11-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.11-release.bin
  

SHA-256: a48a3202c15e50927ce6856a6f81683437f573274209ce6b09c94d2e6a45ce88 (also in SimplrSSH-v1.4.11-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.11-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.11-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.11-release.bin above.

SHA-256: e7389ea70261e45d2a837f32c9d7f1aadf231be45ae0c681661d6276989a6e02 (also in SimplrSSH-v1.4.11-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.11-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

• Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
  add SimplrSSH-Tab5-v1.4.11-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.11-release.bin
  

SHA-256: 0b2b8fc5c8cdf21bd4b6e92f0eb5c398252c592d0aa38922cca56f962df46808 (also in SimplrSSH-Tab5-v1.4.11-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.11-launcher.bin from the SD card instead.
SHA-256: b6bfd9229eb5aa7447a54025f06d46bccf60cdf282e051bc4941b8677de4fed6 (also in SimplrSSH-Tab5-v1.4.11-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

• Esc stops ChatGPT (recording, reply, speech); SSH connect says why it… by @bluenevus in #15

Full Changelog: v1.4.10...v1.4.11

SimplrSSH v1.4.10

SimplrSSH v1.4.10

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.10-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.10-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.10-release.bin
  

SHA-256: 557af88bc82aba5ab09b53080e263e27ab87c754ea80fc8d5c45339b9c93c258 (also in SimplrSSH-v1.4.10-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.10-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.10-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.10-release.bin above.

SHA-256: 1d9c0e97d50a4f711af9f2f1a1feffb50caf6fab53a01bcfba403d74d67597e9 (also in SimplrSSH-v1.4.10-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.10-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

• Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
  add SimplrSSH-Tab5-v1.4.10-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.10-release.bin
  

SHA-256: 49aee2808809d03dfb0f8476bd2e0431f3901a7152ff54bfde3b85fa5c5d68e4 (also in SimplrSSH-Tab5-v1.4.10-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.10-launcher.bin from the SD card instead.
SHA-256: c267ff0eebb8479564d5de43a0ec177e4b0ebd9da99b6c50c019247aaf379ff4 (also in SimplrSSH-Tab5-v1.4.10-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

• Tab5 full-screen SSH terminal (TUI), touch scrolling; key passphrases… by @bluenevus in #14

Full Changelog: v1.4.9...v1.4.10

SimplrSSH v1.4.9

SimplrSSH v1.4.9

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.9-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.9-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.9-release.bin
  

SHA-256: f6a18fb916d5f537eecfce1786064b1b03257ca27fb10e8a70b5951c8703e622 (also in SimplrSSH-v1.4.9-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.9-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.9-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.9-release.bin above.

SHA-256: 8485b48c73880a3cb64ac62a960d3833f443b4edb5a314fcadfd419325905b7a (also in SimplrSSH-v1.4.9-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.9-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

• Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
  add SimplrSSH-Tab5-v1.4.9-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.9-release.bin
  

SHA-256: a58945089e6c5a4f8843bd318f5270fe04cf7b1c709dbe682ad923905af34cb1 (also in SimplrSSH-Tab5-v1.4.9-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.9-launcher.bin from the SD card instead.
SHA-256: 652202cb1ba69fb301eeb09a54c4c066bfbb73f4ed60b1deef669dd44d35e4e9 (also in SimplrSSH-Tab5-v1.4.9-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

• Tab5: fix black screen at boot, power the keyboard and WiFi; hold Ctr… by @bluenevus in #13

Full Changelog: v1.4.8...v1.4.9

SimplrSSH v1.4.8

SimplrSSH v1.4.8

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.8-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.8-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.8-release.bin
  

SHA-256: d62be11fddea1237ecc7d970920303315c30d9a5605058fd1450ef18111c16e7 (also in SimplrSSH-v1.4.8-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.8-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.8-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.8-release.bin above.

SHA-256: ce658ca4f5203ac1c5d6bf6f74efbd014e08678cf2a911004704a69c131ebc80 (also in SimplrSSH-v1.4.8-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.8-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

• Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
  add SimplrSSH-Tab5-v1.4.8-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.8-release.bin
  

SHA-256: a373dd12a537cbd59d06feebef4c35364e6bb040dc5ef236ca2b189e95e944cb (also in SimplrSSH-Tab5-v1.4.8-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.8-launcher.bin from the SD card instead.
SHA-256: dc305235c23b45d40679888adf62abed35eb157e2e6497ca8826e710d3332eeb (also in SimplrSSH-Tab5-v1.4.8-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

• M5Stack Tab5 support: second firmware image from the same sources by @bluenevus in #12

Full Changelog: v1.4.7...v1.4.8

SimplrSSH v1.4.7

SimplrSSH v1.4.7

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.7-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.7-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.7-release.bin
  

SHA-256: 68ba5684667395f54ecbbeb46050342bb8c4746ccac9640864409073c7f11e6c (also in SimplrSSH-v1.4.7-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.7-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.7-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.7-release.bin above.

SHA-256: 8c9c722e29abb5de1cbf3ef9bc92ff08435bb3c1e654c7ed93f08cc7530cb7d7 (also in SimplrSSH-v1.4.7-launcher.bin.sha256)

What's Changed

• Integration by @bluenevus in #11

Full Changelog: v1.4.6...v1.4.7

SimplrSSH v1.4.6

SimplrSSH v1.4.6

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.6-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.6-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.6-release.bin
  

SHA-256: ac569e68a14aa80310ecb1a0e05da2a2d313adcc26fc2b6b75363c59ac4d0e27 (also in SimplrSSH-v1.4.6-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.6-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.6-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.6-release.bin above.

SHA-256: 44819c9564d4ed6362288e1c2af09d19ed9629a984a43bcd243bef99805b8a2b (also in SimplrSSH-v1.4.6-launcher.bin.sha256)

What's Changed

• Integration by @bluenevus in #10

Full Changelog: v1.4.5...v1.4.6

SimplrSSH v1.4.5

SimplrSSH v1.4.5

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.5-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

• Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
  add SimplrSSH-v1.4.5-release.bin at address 0x0, and click Program.
• Command line:

  esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.5-release.bin
  

SHA-256: 92fa786d745a039c18bd6aa307e4fca14fe14b97000af98ac980007e73f9431f (also in SimplrSSH-v1.4.5-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.5-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.5-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.5-release.bin above.

SHA-256: ea22761ae00ec99421a61e66fb4b969d07d765c1a8b2c9f454b76ed04f0f7fe2 (also in SimplrSSH-v1.4.5-launcher.bin.sha256)

What's Changed

• Rename PocketSSH to SimplrSSH; lean README with fork credit by @bluenevus in #9

Full Changelog: v1.4.4...v1.4.5