Guide Getting Started

Intro

An ONetSwitch enables users in different development roles to build a complete networking system in a single node. Users can build the embedded system either from scratch, or based on some pre-built images.
In either way, getting-started projects would help you

• to get acquainted with the board and its components
• to make quick hardware tests on the main silicon and its peripherals
• to understand the usage and be ready for next-stage development

Project List

• Zynq PS Test
  Project to verify the clocks, resets, memories, etc at the ARM CPU side.
• IBERT
  Project to verify the rate and SI of the transceivers using PRBS generator.
• MAC Loopback
  Project to verify the PHYs and the MACs on each of the Ethernet ports.
• PCIe Enumeration
  Project to verify the Mini PCIe and the configuration of PCIe Root Complex.
• QDRII+ Memory Test
  Project to verify the calibration of PL QDRII+ SRAM, with traffic generator.
• DDR3 Memory Test
  Project to verify the calibration and read/write operations on PL DDR3 SDRAM.

The table below shows the applicability.

Project	ONS20	ONS30	ONS45
ZynqPSTest	o	o	o
IBERT	x	o	o
MACLoopback	o	o	o
PCIeRootEnum	x	o	o
QDRIIMemTest	x	x	o
DDR3MemTest	x	o	x