[WIP] Add 3D printing procedure in fabrication folder

[Copilot]

• Inspect existing wiki structure and locate the best Fabrication page for the 3D printing instructions
• Add the minimal documentation change for the 3D print queue / Bambu Studio workflow
• Verify formatting and site build for the updated markdown
• Capture a rendered screenshot for the PR
• Run review and security checks, then finalize

• Fixes 3D Printing #307

[TaylerUva]

Suggested change

	4. In the **Process** drop-down, confirm that the correct Robotics profile is selected.
	4. In the **Process** drop-down, confirm that the correct Robotics profile is selected for the **DESIRED FILAMENT (typically PLA CF)**.

[Copilot]

Addressed in f044533.

[Copilot]

Pull request overview

Adds a new Fabrication wiki page documenting the team’s 3D print queue workflow (Bambu Studio process profile selection, slicing, and exporting to SD card), aligning with Issue #307’s requested step-by-step procedure.

Changes:

• Added a new “3D Print Queue” documentation page under Fabrication/.
• Documented the basic Bambu Studio workflow: open STL → confirm Robotics process profile → orient/arrange → slice → export to SD card → print.

---

💡 Add a code-review agent skill or configure MCP servers for context-aware, tailored reviews. Learn more in the docs.

[Copilot]

One or more custom setup steps configured for this repository failed during this Copilot code review run:

Install MkDocs and extensions

Setup steps run before each review. If the review above is missing context, or no review was posted at all, the failing step above may be the cause. See the workflow run for failure details, fix your setup steps configuration, and re-request a review.

Note

You can configure setup steps for Copilot code review separately from Copilot cloud agent with a copilot-code-review.yml file. Read the docs for details.