chore: release 0.6.0

CHANGELOG.md

@@ -5,9 +5,11 @@ Format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/); version
 
 ## [Unreleased]
 
+## [0.6.0] - 2026-11-06
+
 ### Printer safety
 
-- **A printer command is sent at most once.** When the connection dropped
+- **A dropped connection no longer resends a command.** When the connection dropped
   after a command reached the printer but before its acknowledgement came
   back, the MQTT client reconnected by itself and resent it: a `gcode` move,
   `stop` or `light` ran twice while the command reported success. Automatic
@@ -1135,7 +1137,8 @@ Initial development version: LAN-mode printer control (MQTT/FTPS), one-shot `job
 ### Removed
 - `requirements.txt`, which duplicated the `dependencies` already declared in `pyproject.toml`. Install with `uv pip install -e .` (or `pip install platecli`) instead.
 
-[Unreleased]: https://github.com/DLANSAMA/platecli/compare/v0.5.1...HEAD
+[Unreleased]: https://github.com/DLANSAMA/platecli/compare/v0.6.0...HEAD
+[0.6.0]: https://github.com/DLANSAMA/platecli/compare/v0.5.1...v0.6.0
 [0.5.1]: https://github.com/DLANSAMA/platecli/compare/v0.5.0...v0.5.1
 [0.5.0]: https://github.com/DLANSAMA/platecli/compare/v0.4.0...v0.5.0
 [0.4.0]: https://github.com/DLANSAMA/platecli/compare/v0.3.0...v0.4.0

README.md

@@ -13,8 +13,8 @@
 <!-- Tests/coverage are hand-updated static badges (no coverage service wired up).
      Re-measure and edit both after any release:
      uv run python -m pytest tests/ -q -m "not live" --cov=bambu_cli --cov-report=term -->
-[![Tests](https://img.shields.io/badge/tests-1535%20passing-brightgreen)](#tested-and-hardened)
-[![Coverage](https://img.shields.io/badge/coverage-91%25-brightgreen)](#tested-and-hardened)
+[![Tests](https://img.shields.io/badge/tests-2217%20passing-brightgreen)](#tested-and-hardened)
+[![Coverage](https://img.shields.io/badge/coverage-93%25-brightgreen)](#tested-and-hardened)
 
 [Install](#install) · [Print something](#print-something) · [Try it without a printer](#try-it-in-30-seconds) · [Quality](#tested-and-hardened) · [User guide](https://github.com/DLANSAMA/platecli/blob/main/docs/manual.md) · [Troubleshooting](https://github.com/DLANSAMA/platecli/blob/main/docs/troubleshooting.md) · [For AI agents](#built-for-ai-agents)
 
@@ -159,8 +159,8 @@ The numbers in the badges are measured on this repo, not aspirational:
 
 | | |
 |---|---|
-| **Tests** | 1,535 passing (`pytest -m "not live"`, v0.5.1) — unit, contract, property-based (Hypothesis), and Textual pilot tests |
-| **Coverage** | **91.1%** line+branch across the package; CI fails the build below **86%** |
+| **Tests** | 2,217 passing (`pytest -m "not live"`, v0.6.0) — unit, contract, property-based (Hypothesis), and Textual pilot tests |
+| **Coverage** | **93.5%** line+branch across the package; CI fails the build below **90%** |
 | **Platforms** | Linux, macOS, and Windows in CI, on Python 3.10 / 3.12 / 3.14 |
 | **Blocking gates** | `ruff`, `ruff format`, `mypy` (whole package, `check_untyped_defs`), `bandit`, `pip-audit`, plus layer-boundary and JSON-schema-drift checks |
 | **Mutation testing** | Nightly, scoped to the safety-critical modules (download validation, SSRF guards, slicer options, job payload) |

docs/MASTER-PLAN.md

@@ -10,26 +10,23 @@ The work we chose, in order. **No task from the user? Take the top 🤖 box unde
 
 ## Waiting on you 🧑
 
-- [ ] **D-1 · Merge the audit-round4 PR (#153)** · P1 · 🧑
-  Branch `fix/audit-round4`: at-most-once MQTT delivery, pin precedence, heater limits for raw and pre-sliced G-code, AMS re-read before a guided print, confirmed mDNS results, terminal-escape hardening, config value checks. Needs the 6 CI checks green.
 - [ ] **D-2 · Dependabot PRs #150 (actions) and #152 (python deps)** · P2 · 🧑
   Open since 2026-10-26 and 2026-11-02. *Done when:* merged or closed.
 - [ ] **D-3 · Keep `"bambu"` in the PyPI keywords?** · P2 · 🧑
   Unruled since 2026-07-25; recommendation was keep (nominative search term, not a name).
 - [ ] **L-1 · Post to r/BambuLab** · P1 · both · after L-2
   🤖 rewrites the held copy to lead with `plate tui`/`plate go`; 🧑 posts (Tue–Thu, 10–11 EDT).
-- [ ] **L-2 · Cut 0.6.0** · P1 · both · after D-1
-  `[Unreleased]` holds the A1 slicing fix and two audit waves. 🤖 prepares the release PR per `docs/releasing.md`; 🧑 approves the tag push (it publishes to PyPI).
+- [ ] **L-2 · Cut 0.6.0** · P1 · both
+  Release PR on `release/0.6.0` (2026-11-06) sets 0.6.0 and dates the changelog. 🧑 merges it and approves the `v0.6.0` tag push (it publishes to PyPI).
+  Then 🤖: `pip install platecli==0.6.0` and `'platecli[tui]==0.6.0'` in a clean venv (`plate --version`, `plate --sim status`), then the `0.7.0.dev0` bump PR (`docs/releasing.md` steps 4 and 6).
 
 ## Next
 
-- [ ] **L-3 · Check that 0.5.1 installs from PyPI** · P2 · 🤖
-  Never verified after the 2026-08-28 publish. Clean venv, `pip install platecli==0.5.1`, `plate --version`, `plate --sim status`.
-  *Done when:* the result is recorded in `docs/plan/done.md`.
+- [ ] **L-4 · Re-record the hero GIF with `plate job`** · P2 · both
+  The README hero shows `status`/`slice`, not the command the pitch rests on. Recording starts a real print: 🧑 says yes and is at the printer.
 
 ## Later
 
-- [ ] **L-4 · Re-record the hero GIF with `plate job`** · P2 · both
-  The README hero shows `status`/`slice`, not the command the pitch rests on. Recording starts a real print: 🧑 says yes and is at the printer.
+Nothing chosen yet; new findings go in `docs/plan/inbox.md`.
 
-**Highest ids given:** D-3 · L-4 · S-3 · retired: S-1, S-2, S-3
+**Highest ids given:** D-3 · L-4 · S-3 · retired: D-1, L-3, S-1, S-2, S-3

docs/plan/done.md

@@ -2,6 +2,8 @@
 
 One line per finished plan box, newest first: `- date · id · what happened · commit`.
 
+- 2026-11-06 · L-3 · closed: folded into L-2, which checks the 0.6.0 install from PyPI (a 0.5.1 check is stale once 0.6.0 ships) · this commit
+- 2026-11-06 · D-1 · PR #153 (audit round 4) squash-merged after all 6 checks passed on its last commit · e925f96
 - 2026-11-05 · S-3 · setup shows a lone mDNS result and asks (no → manual entry); unspecified/multicast addresses are skipped, public/loopback ones need an explicit yes, also when picked from several · this commit
 - 2026-11-05 · S-2 · real (the slot was read once, at material choice): `plate go` and the TUI re-read the AMS on Start print and refuse with nothing sent if it changed or can't be read; confirm summary gains Feed and Temperatures rows; pilot + wizard tests · 8cae64c
 - 2026-11-05 · S-1 · `upload`/`job`/`send` scan every `.gcode` member of a 3MF (and plain `.gcode`) for M104/M109/M140/M190 over 350/150 °C before upload; `job --dry-run` reports it too; unreadable members fail closed; 0.5 s for 2M lines · ef01a1d

docs/plan/inbox.md

@@ -21,3 +21,4 @@ Noticed but not chosen, one line each, oldest first: `- date · where · what ·
 - 2026-11-05 · bambu_cli/commands/doctor.py · the capabilities file is written with `json.dump` defaults, so a NaN in a report would make it invalid JSON (unverified) · (review of the round-4 fixes)
 - 2026-11-05 · bambu_cli/gcode_limits.py · the pre-sliced scan has no cap on total decompressed size: a highly compressible 3MF can take minutes to scan (memory stays bounded) · (review of the S-1 fix)
 - 2026-11-05 · bambu_cli/gcode_limits.py · whether Bambu firmware ends a G-code line at a bare CR is unconfirmed; the scanner treats CR as a break, the safe reading · (review of the S-1 fix)
+- 2026-11-06 · main checkout, branch `fix/audit-round3` · 4 local commits (`13cb15c`..`a04ac04`, 2026-11-05) add 223 coverage test files and were never pushed; decide whether to land them as a PR · (seen while cutting 0.6.0)

pyproject.toml

@@ -6,7 +6,7 @@ build-backend = "setuptools.build_meta"
 name = "platecli"
 # Unreleased work carries a .devN suffix so a source build is never mistaken
 # for the released wheel of the same number. Drop the suffix when tagging.
-version = "0.6.0.dev0"
+version = "0.6.0"
 description = "platecli — local CLI for Bambu Lab printers (not affiliated with Bambu Lab)"
 readme = "README.md"
 requires-python = ">=3.10"