Repository navigation
Running the motors on MD10 R2 restarts the arduino UNO #15
Description
Hi I have been using the sketch from Simhub to build a windsimulator using the md10 R2.
- I am using 12V powersupply for MD10 R2
- Arduino UNO is connected to the PC using the USB cable
- Test button works perfectly without any issue and the fan turns without restarting the UNO
- Only when the fan is triggered using the UNO it restarts the UNO
How do I solve this
Activity
waiweng83 commentedon Apr 25, 2025
Can you try it out without the motor connected?
vishalchaudhary commentedon Apr 25, 2025
I will try it today and get back, thanks for the prompt response, really appreciate it.
vishalchaudhary commentedon Apr 25, 2025
@waiweng83 I just checked, without the fan attached there is no issue of restart, it works perfectly and never restarts the arduino.
waiweng83 commentedon Apr 28, 2025
Can you share the connection diagram?
vishalchaudhary commentedon May 3, 2025
@waiweng83 Thanks for the support, seems like the board was faulty, I changed the board and everything is working fine now. I have one question though, I felt the cytron board runs pretty hot after 30mins of use at around 3amps, does it need active cooling ?
vishalchaudhary commentedon May 4, 2025
Today the cytron board cut power because of heating, can you give me some solution, what kind of active cooling is required for this board
waiweng83 commentedon May 6, 2025
MD10C should be able to withstand 10-13A continuously without any active cooling. And for your information, it doesn't have the features to cut the power when overheat, most probably it's due to other problem.
Can you please contact support@cytron.io directly to further troubleshoot your problem? probably some pictures, videos and connection diagram of your setup will be of great help.
Thanks.