1. Download the HackerPet_Setup.Zip https://github.com/CleverPet/HackerPet_Setup/releases

2. Extract the zip to any location you have full write permissions on your PC Make note of that location.

3. Download and install Particle CLI - Link and instructions below https://docs.particle.io/getting-started/developer-tools/cli/

4. Download and install Python 3 - Link below. Also make sure to check the box for [X] "add python.exe to PATH" ( check box at the bottom of first screen of installer ) https://www.python.org/downloads/

5. For windows open the cmd prompt Navigate to where you extracted the folder Run the HackerPet_Setup.bat

or for mac or linux run python HackerPet_Setup.py

Any issues, email support@clever.pet

Brian

-- To Do --

• Flash the latest HackerPet firmware from the web in the command line

  • detect type of Particle board, photon, p1, photon 2, etc...

• Allow setting up the photon without a particle account.

  • update Device OS
  • configure wifi
  • flash the HackerPet firmware