Update the diagram for RP2040 zero

[Omarbeepboop]

Can you please add resistor to the diagram for RP2040 Zero
I spent almost the whole day trying to fix that, turned out the schematics shows resistors of 27ohm were required.
I know it was mentioned and shown in the schematics.. but for a noobie like me that could have saved a lot of time

[HandisableL]

I'm using wave share rp2040-zero,and Firmware "OGX-Mini-v1.0.0a3-PI_PICO.uf2",
USB Cable <--> RP2040 Zero Pin
5V(Red) - 5V
D-(White) - GPIO 1
D+(Green) - GPIO 0
GND(Black) - GND

[bewareweegee]

I'm using wave share rp2040-zero,and Firmware "OGX-Mini-v1.0.0a3-PI_PICO.uf2", USB Cable <--> RP2040 Zero Pin 5V(Red) - 5V D-(White) - GPIO 1 D+(Green) - GPIO 0 GND(Black) - GND

I have an identical rp2040-zero, but flashing the pico version of the firmware like you said just leaves it unresponsive.