After hard_reset windows app doesn't recognize the mouse anymore.

[Ozzymud]

After clicking on the apply button I now get this after running the hard_reset from cli.

I was trying to figure out how to loop the macro (Cycle until and key pressed), but could not so I went back to the app in windows which was working just before the hard_reset and boom, nothing.

Using M601RGB_Setup_V1.0.4.rar from the red dragon site.

[so1der]

Hello there again! Sorry, completely missed that issue D:
That's weird.
I had the opposite situation - in the process of writing the script, I accidentally sent the wrong data to the mouse, and it also stopped being recognized in the Windows program, but in my case, a hard_reset fixed it. What a hard reset does is it sends packets identical to those that sent by the official program when resetting the settings (or at the very first launch, I don't remember exactly).
For now I don't know if there a way to fix this, sorry :(
But I can try to figure loop option for you!

[so1der]

OHHHH, now I understand! Error that You got in Issue #6 was not HID-code related issue, It was because of macros loops!
[112, 1, 2, 1]
112 - macros key
1 - macros slot (1-5)
2 - loop mode (1 - single loop; 2 - loop until any key pressed; 4 - loop until key release)
1 - seems to always be "1" in macros

So to loop macros, You don't need to modify macros itself, You just need to change "button type". I added new values for buttons in commit 67feb34, so You can modify your ini file to something like this:

button_1 = left
button_2 = right
button_3 = middle
button_4 = forward
button_5 = back
button_6 = macro_1_loop_until_any
button_7 = change_mode

There are two "new" type of buttons now:
macro_N_loop_until_any - loops macros until any mouse key is pressed
macro_N_loop_until_release - loops macros while You hold the button
where N - is number of macro slot/memory cell (1-5)

I tested this and it seems to work fine. But once again, because of the "keyboard related" part of the mouse, I had to physically reconnect the mouse to get the macros to work. Also, for some reason I had to upload the .ini file a few times, it works strangely, but I'm not sure if it's related to Linux, my mouse, or the script itself.

Please, let me know, if it works for You! And once again - sorry for caused problems :(