AC not turned on in override mode.

[DrieWielRr]

RoomMind version

1.75

Home Assistant version

2026.7.2

Description

Putting the AC in override does nothing, it knows the temperature will go up if nothing is done:

Yet its not honerring the override, when the temperature reaches the max setting (which is Eco: 28.0°C) the unit turns on and start blowing cold air to cool the room, but never towards the override temperature
If I temporary update the schedule and set current hour as active for comfort the unit immediately turns on and start cooling the room, when putting the override on comfort when its schedule was active -> comfort the unit turns off again..
So im pretty sure something broke within the overrides with the last update.

Steps to reproduce

No response

Diagnostics

No response

Relevant log output

[DrieWielRr]

Im also noticing a shutdown sequence issue.
The AC is set to 17 degrees (thats its supported minimum) then ~10s later its shut-down, this causes the AC to temporary ramp up and blow al lot of cold air before actually shutting down.

[FabianGabor]

I noticed that while learning, the override function works well but afterwards it seems to be inverted: when override is enabled, AC is turned off even when it's hotter than the target and the AC turns on when override is off.

[DrieWielRr]

Im noticing when I set the target far away from the room temperature the does AC turns on for a second showing cooling x% in RoomMind followed by returning to standby a couple of seconds later even though target and room are 5 degrees apart..
If I override like 1 or 2 degrees below room temperature RoomMind does not even bother to change posture..

Ps:
My room is not in learning phase.