Hi,
I'm wanting to use continuous print to allow me to queue multiple prints, but I'm having issues getting it to work.. I am using loop to remove the prints from the bed and have added start and end g.code to my prusaslicer and it works fine if printing outside continuous print, though I have issues when using continuous print. The print won't advance to the next file in the list.
Here is the start and end code that I currently use in prusaslicer.
M862.3 P "[printer_model]" ; printer model check
M862.1 P[nozzle_diameter] ; nozzle diameter check
M115 U3.10.1 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
G28 W ; home all without mesh bed level
G1 Z20 F1000 ;raise Z axis
G1 Y212 F10000 ;move bed to idle position
M140 S[first_layer_bed_temperature] ; set bed temp
M190 S[first_layer_bed_temperature] ; wait for bed temp
M109 S170 ;wait for extruder temp for ABL
G80 ; mesh bed leveling
G1 Z15 F1000 ;raise Z axis
M104 S[first_layer_temperature] ; set extruder temp
M109 S[first_layer_temperature] ; wait for extruder temp
;----Intro line sequence------
G1 Z0.2 F720 ;raise Z axis
G1 Y-3 F1000 ; go outside print area
G92 E0 ;zero extruder
G1 X80 F10000 ; move X-axis
G1 E5 F1000; prime the nozzle
G1 X180 E21 ; intro line
G1 Z0.4 F720 ;raise Z axis
G1 X80 E21 F1000 ; intro line
G1 Z0.8 F720 ;raise Z axis
G1 X180 E21 F1000 ; intro line
G1 Z1.2 F720 ;raise Z axis
G1 X80 E21 F1000 ; intro line
G1 Z1.6 F720 ;raise Z axis
G1 X180 E21 F1000 ; intro line
G1 Z2 F720 ;raise Z axis
G1 X80 E21 F1000 ; intro line
G1 X70 F10000 ; quickly move away from intro line
G1 E-0.8 ;retract
G92 E0 ;zero extruder
;--------------------------------------
M221 S{if layer_height<0.075}100{else}95{endif}
and the end code is
G1 E-6 F1000 ;retract
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA
{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}
M104 S0 ; turn off temperature
M107 ; turn off fan
G1 Y212 F10000 ; move Y-axis
{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+5, max_print_height)}{endif} ; Move print head up
;-----Automatic ejection sequence------
M190 R32 ; wait for bed temp !!CHANGE THIS TO YOUR SPECIFIC RELEASE TEMPERATURE!!
G1 X245 F7000 ; move X-axis
G1 Z210 F1500 ; raise Z-axis
M907 Y800 X800 ; increase Y+X-motor current temporarily
G1 X210 F800 ; move X-axis
; wiggle motion
G1 Y-4 F2500 ; move Y-axis
G1 Y210 F20000 ; move Y-axis
G28 Y ;home Y to knock off lose objects
G28 Y ;home Y to knock off lose objects
G28 Y ;home Y to knock off lose objects
G1 Y-4 ; move Y-axis
G1 Y155 ; move Y-axis
G1 X247.5 F800 ; move X-axis
M907 Y540 X540 ;reset Y+X-motor current
G1 Z50 F1000 ; lower Z-axis
G1 X125 Y212 F10000 ; move X-axis
;--------------------------------------
M140 S0 ; turn off heatbed
M84 ; disable motors
If I remove the end code from prusaslicer and add it to the scripts, under Bed clearing on CPQ's settings, would that suffice? Will I have to put anything in the end code of prusa slicer, or can I simply leave that blank? Is there anything else I may be missing?
Thank you ever so much!
Hi,
I'm wanting to use continuous print to allow me to queue multiple prints, but I'm having issues getting it to work.. I am using loop to remove the prints from the bed and have added start and end g.code to my prusaslicer and it works fine if printing outside continuous print, though I have issues when using continuous print. The print won't advance to the next file in the list.
Here is the start and end code that I currently use in prusaslicer.
and the end code is
If I remove the end code from prusaslicer and add it to the scripts, under Bed clearing on CPQ's settings, would that suffice? Will I have to put anything in the end code of prusa slicer, or can I simply leave that blank? Is there anything else I may be missing?
Thank you ever so much!