Anyway to reset filter status?

[rgricos]

Hi,

Added this integration to Home Assistant. Works great.

With Filter Status, is there anyway to reset it from the home assistant integration?

thanks

[rgricos]

@sh00t2kill

[sh00t2kill]

There is no way to reset this status either in HA or via the mobile app (at least not that I have seen)

The only way to reset the filter status is to clean the filter and start cleaning.

Note that if you run the additional fine filter, the robot doesnt report this correctly. It pretty much always reports as full. This is a robot problem, not strictly an app/integration problem.

[rgricos]

thanks for the reply.

In the native My Dolphin Plus app, when the filter shows full you can click it and hit "reset" - this resets the filter status.

I do run two filters (normal and fine) and my robot does always seem to report that the filter is "full" - even only a few hours after i clean it. Good to know that is a problem with the robot itself.

[sh00t2kill]

thanks for the reply.

In the native My Dolphin Plus app, when the filter shows full you can click it and hit "reset" - this resets the filter status.

I do run two filters (normal and fine) and my robot does always seem to report that the filter is "full" - even only a few hours after i clean it. Good to know that is a problem with the robot itself.

will have a look -- the app has recently updated so thats why i qualified my statement. It definitely wasnt there prior to the new app.