diff --git a/grobro/grobro/client.py b/grobro/grobro/client.py
index 65f015e..c21dfd2 100644
--- a/grobro/grobro/client.py
+++ b/grobro/grobro/client.py
@@ -371,7 +371,7 @@ def __on_message(self, client, userdata, msg: MQTTMessage):
                 self._client.publish(topic, smart_meter["data"], retain=PUBLISH_SENSORS_RETAINED)
                 return
 
-            # NOAH/NEXA-specific message types (FE19 config, 0103 holding regs, etc.)
+            # NOAH/NEXA-specific message types (FE19 config, etc.)
             noah_msg = parser.parse_noah_message(unscrambled)
             if noah_msg and noah_msg.get("message_type") == 0xFE19:
                 if device_id.startswith("0PVP") or device_id.startswith("0HVR"):
@@ -411,14 +411,16 @@ def __on_message(self, client, userdata, msg: MQTTMessage):
                     LOG.info("Modbus message from unknown device type: %s", device_id)
                     return
 
-                if (
-                    modbus_message.function
-                    == GrowattModbusFunction.READ_SINGLE_REGISTER
+                if modbus_message.function in (
+                    GrowattModbusFunction.READ_SINGLE_REGISTER,
+                    GrowattModbusFunction.READ_HOLDING_REGISTER,
                 ):
                     state = HomeAssistantHoldingRegisterInput(device_id=modbus_device_id)
                     
                     for name, register in known_registers.holding_registers.items():
                         data_raw = modbus_message.get_data(register.growatt.position)
+                        if data_raw is None:
+                            continue
                         value = register.growatt.data.parse(data_raw)
                         if value is None:
                             continue
diff --git a/grobro/grobro/parser.py b/grobro/grobro/parser.py
index d3e63d8..5e15636 100644
--- a/grobro/grobro/parser.py
+++ b/grobro/grobro/parser.py
@@ -167,25 +167,6 @@ def parse_config_ack(data: bytes):
 # The 2-byte type/subtype field starts at payload offset 14.
 
 
-def parse_noah_0103(data: bytes) -> dict:
-    """
-    NOAH type 0x0103 — Holding register dump.
-    Payload: 14 zero bytes + 16B device serial (offset 14) + register data.
-    """
-    payload = data[24:]
-    device_id = payload[14:30].rstrip(b"\x00").decode("ascii", errors="replace")
-    reg_data = payload[30:]
-    registers = []
-    for i in range(0, len(reg_data) - 1, 2):
-        registers.append(struct.unpack_from(">H", reg_data, i)[0])
-    return {
-        "message_type": 0x0103,
-        "device_id": device_id,
-        "registers": registers,
-        "register_count": len(registers),
-    }
-
-
 def parse_noah_0110(data: bytes) -> dict:
     """
     NOAH type 0x0110 — Preset-multiple register response/ack.
@@ -315,7 +296,6 @@ def parse_noah_6f64(data: bytes) -> dict:
 
 
 NOAH_DECODERS = {
-    0x0103: parse_noah_0103,
     0x0110: parse_noah_0110,
     0x0125: parse_noah_0125,
     0xFE18: parse_noah_fe18,
diff --git a/grobro/model/modbus_message.py b/grobro/model/modbus_message.py
index c23f093..474e17d 100644
--- a/grobro/model/modbus_message.py
+++ b/grobro/model/modbus_message.py
@@ -116,7 +116,7 @@ class GrowattModbusMessage(BaseModel):
         - B - 1 byte modbus device address (seems to be constant 1 in mqtt)
         - B - 1 byte function
         - 30s - 30 byte zero-padded device id
-        - optional GrowattModbusMetadata - only present when function == READ_INPUT_REGISTER
+        - optional GrowattModbusMetadata - present for functions READ_INPUT_REGISTER and READ_HOLDING_REGISTER
         - N register blocks
     """
 
@@ -163,12 +163,17 @@ def parse_grobro(buffer) -> Optional["GrowattModbusMessage"]:
             offset = 38
 
             metadata = None
-            if function == GrowattModbusFunction.READ_INPUT_REGISTER:
+            if function in (
+                GrowattModbusFunction.READ_INPUT_REGISTER,
+                GrowattModbusFunction.READ_HOLDING_REGISTER,
+            ):
                 metadata = GrowattMetadata.parse_grobro(buffer[offset:])
                 offset += metadata.size()
 
             while len(buffer) > offset + 6:
                 block = GrowattModbusBlock.parse_grobro(buffer[offset:])
+                if block is None:
+                    return None
                 register_blocks.append(block)
                 offset += block.size()
 
diff --git a/tests/model/test_commands.py b/tests/model/test_commands.py
index c5dd205..37c4f11 100644
--- a/tests/model/test_commands.py
+++ b/tests/model/test_commands.py
@@ -4,6 +4,7 @@
 
 from grobro.grobro import parser
 from grobro.model.modbus_message import (
+    GrowattModbusFunction,
     GrowattModbusMessage,
 )
 from grobro.model.modbus_function import GrowattModbusFunctionSingle
@@ -229,10 +230,13 @@ def test_noah_preset_multiple_charge_limit():
 def test_noah_type0103_holding_registers():
     data = (DATA_DIR / "NoahType0103_HoldingRegs.bin").read_bytes()
     unscrambled = parser.unscramble(data)
-    result = parser.parse_noah_0103(unscrambled)
-    assert result["message_type"] == 0x0103
-    assert result["device_id"] == NOAH_TEST_DEVICE_ID
-    assert result["register_count"] > 0
+    result = GrowattModbusMessage.parse_grobro(unscrambled)
+    assert result is not None
+    assert result.device_id == NOAH_TEST_DEVICE_ID
+    assert result.function == GrowattModbusFunction.READ_HOLDING_REGISTER
+    assert result.metadata is not None
+    assert result.metadata.device_sn == NOAH_TEST_DEVICE_ID
+    assert len(result.register_blocks) > 0
 
 
 def test_noah_type0110_response():