Still active ?

[CTSchorsch]

Hi,
are there still some people working on this project ? I really like it and want to create a new PCB with den WT32-ETH01 Board.
Are there any problems using HA with this ?

Georg

[pilotak]

there is no need for work - it just works, and its fully finished (important thing to get Open Source Hadrware certification)

[Coil98]

Hello,

I’ve modified the main board and added several new features: DS18B20 support, RS485 input, and a power supply module. I also added a front panel with IN and OUT LEDs.

If anyone is interested—and if Pilotak has no objections—I can share the modified version on GitHub.

[pilotak]

I love the LEDs flipped, please post image when done. If i'm right the LEDs PCB is go into the enclosure as top panel? go ahead and upload it as a fork or if you want as a V4 and make PR

[Coil98]

Yes, the LED PCB goes on the top panel. Regular LEDs are a pain to solder when flipped, but proper reverse-mount LEDs aren’t cheap, so it’s worth it. 🙂

I’ll upload it soon—I just need to tidy up the PCB layout and schematics.

[3ditguy]

@Coil98 Any ETA on publishing your update? I'm looking at doing a run of these for a project and the diagnostic LED's would be a great addition!

[Coil98]

Hello all,

Sorry for the delay—I have very little time at the moment. I have uploaded the files to GitHub:
https://github.com/Coil98/eth-io-Front-Panel-RS485-DS18B20-/tree/18495ac051362aa7abd7f1c362584e0efeda1b74/hw/ETH_IO(RS485-DS18B20-Panel

There is no BOM or documentation yet—sorry about that. I will try to add these as time goes on.

I also have two smaller modules that work as extensions for the ETH IO main module:

• One module with 6 relay outputs and 2 transistor outputs

• Another module with 4 analog inputs (0–20 mA / 0–10 V) and 4 analog outputs (0–10 V)

I will upload these in the future. If you have any questions or suggestions, please let me know.