wiThrottle should support DCC decoders with 28 speed steps.
There should be a selection after the DCC address with at least the options "128", "28" speed steps.
May be this could extended to all options available on a Loconet command station (14, 128 DAC, 28 DAC, SX, ...).
I assume that this requires an extension of the wiThrottle protocol, selection of speed steps in the wiThrottle server is much to complicated for the average user.
There are many (older) decoders (like Lenz LE103, LE040) that does not work with 128 speed steps but are still used. Also there are some decoders that support speed table only when used with 28 speed steps.
wiThrottle should support DCC decoders with 28 speed steps.
There should be a selection after the DCC address with at least the options "128", "28" speed steps.
May be this could extended to all options available on a Loconet command station (14, 128 DAC, 28 DAC, SX, ...).
I assume that this requires an extension of the wiThrottle protocol, selection of speed steps in the wiThrottle server is much to complicated for the average user.
There are many (older) decoders (like Lenz LE103, LE040) that does not work with 128 speed steps but are still used. Also there are some decoders that support speed table only when used with 28 speed steps.