Small issues found in new dashboard

[Comodore125]

The fuel per 100 does miss point. instead of 10.2 it says 102 per 100km in the said field. Was observed on my 307 and is valid for both trip computers.
Beside that the raw oil temp value starts very high e.g. 62 and when the gauge on the instrument panel is at 90 it shows approximately 125. maybe it needs to be lowered by -35? I am not sure. Of course the oil next to it is a little bit misleading in a car without oil and just the water temp.

Beside that its immpresive. Inlcudes even my cruise control. And yeah. its almost perfect!

[Comodore125]

also set speed for my own CC does not have . and displayes eg. 7200 instead of 72km/h set

[Comodore125]

I am working on PR to fix this. I am testing it now. With other stuff I am working on. could be done in days or probably not more than 14 days

[morcibacsi]

Should be fixed in latest version.

Which engine do you have in your car?

[Comodore125]

I got 1.4 16V. I will try this. Sorry for not giving you PR, I was testing so many things and did not use version control and you are faster than I could get to it.

Among the capabilities, I was trying to add the unlock key cracking to the telecoding menu. but before I really needed it I reversed some firmware file for my RD45 and then I was working on EMF C telecoding but the B3 zones from treeview did not work at all. so I did try to verify some items and went on and on so I actually now have also the EMF C zone file that works incredibly well. The RD45 I would say is polished now, the EMF C - while it works fine I have some additional non existing zones that I was trying to find more info. But I wonder if I should publish it. I could continue working on the cracking functionality if you are interested but I dont need it at the moment. Anyway the thing I am working on was for newer I think UDS ECUs so I did improve it to work well with kwp. Last time I tried it on EMF C but there I found out is no key, so there was nothing to crack. Its a code taken from pypsadiag but I had to fix it. I wonder if that would be a good addition to the project.

If I would share my json within pypsadiag, I can tell you it would not work. Your telecoding is much more refined, pypsadiag is not working with session well and so on. From my review you did it 100% ;) So I wonder if you would like to point me in a direction where to put these files. I can share them, even though they were such a hard work to produce in this high quality.

Does your release fix the raw temperature data? I noticed that you have some note that the real one is -40. If that is the case, my instrument panel is lying to me :D But I would not be the first, this is something my friend with gold mark V told me about as well.

[Comodore125]

I have to say I am incredibly impressed by the latest update regarding the dashboard. just sharing how it looks on my side. Coolant temp is great. I have to say I have no idea how did you manage to add oil temp there? is that synthetic value? Is that the value the engine ECU computes? Same algo?

Just small note that there is a blank space. Or is it due to my car?

Also the C10 is indeed back! Thanks

[Comodore125]

Hi, I have to tell you. This release is amazing. but either its too much for it as my display was glithing the next day after installing it and then running the dash on the wifi.
I did a lot of experiements with bridge and sure, I use AI generated code but also try to understand the pattern present and so on. I think this release regarding the dashboard might have some bug or its too much. I was adding features while respecting the patterns e.g. the way you handle prirorites for the one core and things were stable. Feels you fell in the same trap as me.

So I will definitely switch back to 3.6.3 as stability is more than seeing oil temp. Or I can try to fix it. But I cant do it right now. To explain more about the performance issues, feels to me like CAN was running out of sync once per around 10 seconds. In effect the display was blank from time to time. I do have display connected via radio but once I fixed the code to be performance first then I had it stable even with added experimental features. To be frank, I am constantly learning more and AI makes me more knowledgable and I review code a lot. I understand every decision I made and I am able to go back. But I dont want to go super slow too.

[Comodore125]

#69 fix for the bug described above. will do more fixing no later than monday. but I am going back to car and try to improve the UI blank so I am coming back anyway now

EDIT: Glitches completely gone. brige 100% stable. I did some further improvements that made sense to me.

[Comodore125]

I would say for the rest I created patch #71
both together should fix all and add little bit better functionality at least in my mind