ESP32 Uploading / running error

[3dHogt]

Hello,
I love your project.
Unfortunally I have issues with running on the esp32.
After upload the serial monitor is consantly running code (in correct Baud 115200).

I was only able to upload with an additional library "audio-driver".

Did anyone have the same trouble and the solution?

Serial Monitor output:
ELF file SHA256: aa17886804594911 E (489) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 E (466) spi_flash: Detected size(8192k) smaller than the size in the binary image header(16384k). Probe failed.

Thanks!

[rhyswynn]

I had the same issue, add this additional repo to the Arduino/libraries folder
git clone https://github.com/pschatzmann/arduino-audio-driver.git