Horizontal Borders at 4:3 480p

[uberdisko]

I recently modified my OSSC to run the newer 1.2x firmwares and everything was running practically the same with the new bonus features, until I noticed something strange, certain 480p frequencies were triggering off borders on the top and bottom of the display on images that should not have them, I was mainly using the OSSC with some macintoshes I just got so I didn't think too much of it (maybe they were spitting out a odd frequency)

but I switched to my Xbox and it was having the same issue

[marqs85]

Which lineX mode and sampling preset are in effect when you see the unwanted borders? Also, do the border overlap some active content?

[uberdisko]

I think it effects all Line X modes I believe but I mainly use 2x with a CRT Monitor, it also seems like it's trying to run at 512x384p, if I go to the lineX And Advanced Timings there are a ton of Blank Timings and I believe the one it's on is 384p but shows up blank on that timing title

For some reason it won't let me share Pictures here otherwise I would give you a example earlier so here is a link to a pic of the issue on my twitter: https://x.com/i/status/2046255680185614632

[marqs85]

Blank timings are not normal, try resetting the profile to see if that resolves it.

[uberdisko]

Every Profile is like this after the 1.2x Mod

[uberdisko]

I'll try to get more pictures and video after work to show more of the timing issues

[uberdisko]

I feel like I did the mod correctly, I also took pictures of that if you want to make sure I didn't botch something: https://x.com/i/status/2046258735669006412

[marqs85]

The mod is extremely unlikely to cause issues with preset names/contents. If resetting the profile does not help, then I'd recommend re-flashing the firmware.

[uberdisko]

Ok I'll try both of these things, I was hoping updating from 1.20 to 1.21 would resolve this but I have been seeing the same borders after the flash/update too. But I will try again