Do you know which bits control the +/-/ENTER /Red dial?

[datapaganism]

Do you know which parts in the hid report control +/-/ENTER /Red dial?
I am mapping my own controller to this but I am struggling to get those to work

Thank your for this project its been great for my fork that I've been working on

[jfedor2]

This should have the info you need:

https://github.com/matlo/GIMX/blob/master/shared/gimxcontroller/include/g29_ps4.h
https://github.com/matlo/GIMX/blob/master/shared/gimxcontroller/src/g29_ps4.c

[datapaganism]

Thank you again, I've done some testing and the report struct should look like this, I can raise a PR if you'd like (it won't make a difference I guess but its more documented then)

// G29 HID report
typedef struct __attribute__((packed)) {
    uint8_t lx;
    uint8_t ly;
    uint8_t rx;
    uint8_t ry;
    uint32_t dpad : 4;
    uint32_t square : 1;
    uint32_t cross : 1;
    uint32_t circle : 1;
    uint32_t triangle : 1;
    uint32_t L1 : 1;
    uint32_t R1 : 1;
    uint32_t L2 : 1;
    uint32_t R2 : 1;
    uint32_t select : 1;
    uint32_t start : 1;
    uint32_t L3 : 1;
    uint32_t R3 : 1;
    uint32_t PS : 1;
    uint32_t touchpad : 1;
    uint32_t counter : 6;
    uint8_t reserved[35];
    uint16_t wheel;
    uint16_t throttle;
    uint16_t brake;
    uint16_t clutch;
    uint8_t gear1 : 1;
    uint8_t gear2 : 1;
    uint8_t gear3 : 1;
    uint8_t gear4 : 1;
    uint8_t gear5 : 1;
    uint8_t gear6 : 1;
    uint8_t gear7 : 1;
    uint8_t gearR : 1;
    uint16_t reserved2;
    uint8_t enter : 1;
    uint8_t minus : 1;
    uint8_t plus :  1;
    uint8_t dual_ccw : 1;
    uint8_t dial_cw : 1;
    uint8_t reserved3[9];
} g29_report_t;