New design board

[mciucci65]

is it possible to reduce pcb dimension 100x100mm or in alternative please upload all files needed to modify pcb.

thanks

[jefftranter]

All of the design files should be available at easyeda.com but for some reason the PCB design files have disappeared. I need to investigate why and see if I can restore them.

[jefftranter]

The PCB design is now restored. See:
https://oshwlab.com/tranter/6502-single-board-computer
https://easyeda.com/editor#id=|13ba5c8d62594a27af6aa33cc2d1e122|0203c5587db847d9976f07605906b043|da5657f366914e4792340b614ad4db7a

[mciucci65]

Great thanks. Unfortunately I don't know EasyEDA. Can you change the PCB size yourself to be within 100x100mm because otherwise JCLPCB asks too much money for the current one? kind regards Massimo Ciucci Il giorno sab 14 set 2024 alle ore 18:29 Jeff Tranter < ***@***.***> ha scritto:

…

The PCB design is now restored. See: https://oshwlab.com/tranter/6502-single-board-computer https://easyeda.com/editor#id=|13ba5c8d62594a27af6aa33cc2d1e122|0203c5587db847d9976f07605906b043|da5657f366914e4792340b614ad4db7a — Reply to this email directly, view it on GitHub <#25 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYGOVJXIFH4GXJQG65W2YRTZWRP5RAVCNFSM6AAAAABOGVL5OWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJRGA2TCNZUGI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[jefftranter]

It would be significant work to change the dimensions.
I get a quote from JLCPCB for 5 boards for under US$10 (plus shipping). That doesn't sound expensive to me.

[mciucci65]

Hi thanks again. I understand correctly but can it be used as a replica of various retro PCs with 6502 like Kim1 Apple IIc and others? kind regards MC Il giorno dom 15 set 2024 alle ore 14:42 Jeff Tranter < ***@***.***> ha scritto:

…

It would be significant work to change the dimensions. I get a quote from JLCPCB for 5 boards for under US$10 (plus shipping). That doesn't sound expensive to me. — Reply to this email directly, view it on GitHub <#25 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYGOVJS3XE6K3LEHEPCTEY3ZWV6ELAVCNFSM6AAAAABOGVL5OWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJRGU3TMNBSGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[jefftranter]

It is not directly compatible with any other retrocomputers other than using the same 6502 microprocessor as many of them. Many programs like those for the KIM-1 can be ported to it, and it runs some versions of BASIC.

[mciucci65]

Hi Jeff, I spoke today with Poste Italiane and seems that there is a wrong shipment address and only the sender can speak with Poste Italiane to correct this. Thank you Kind regards Massimo Ciucci Il giorno dom 15 set 2024 alle 16:44 Jeff Tranter ***@***.***> ha scritto:

…

It is not directly compatible with any other retrocomputers other than using the same 6502 microprocessor as many of them. Many programs like those for the KIM-1 can be ported to it, and it runs some versions of BASIC. — Reply to this email directly, view it on GitHub <#25 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYGOVJXLDMN3YAS4BXQDGJLZWWML5AVCNFSM6AAAAABOGVL5OWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJRGYZDENZTGU> . You are receiving this because you authored the thread.Message ID: ***@***.***>