U-Boot 2017.09-g44f011c-dirty #root (Oct 16 2025 - 09:42:19 +0330)
Board: FriendlyELEC RK3588 board
PreSerial: 2, raw, 0xfeb50000
DRAM: 31.7 GiB
Sysmem: init
Relocation Offset: ed900000
Relocation fdt: eb7f9570 - eb7fecd0
CR: M/C/I
Using default environment
optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
TEEC: Waring: Could not find security partition
DM: v2
boot mode: normal
RESC: 'resource', blk@0x0000a000
lib/avb/libavb_user/avb_ops_user.c: trusty_read_lock_state failed
Error determining whether device is unlocked.
Device is: UNLOCKED
DTB: rk3588-nanopi6-rev06.dtb (275604)
HASH(c): OK
ANDROID: fdt overlay OK
usb dr_mode not found
usb dr_mode not found
usb dr_mode not found
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x80, OFF=0x80
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
use 0xede00000 as drm logo base memory
get vp0 plane mask:0x7, primary id:0, cursor id:2, from dts
get vp1 plane mask:0x148, primary id:6, cursor id:3, from dts
get vp2 plane mask:0x280, primary id:7, cursor id:9, from dts
Could not find baseparameter partition
I2c6 speed: 200000Hz
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:3[Cluster0 Cluster1 Esmart0 ], primary plane: Cluster0
vp1 have layer nr:3[Esmart1 Cluster2 Esmart2 ], primary plane: Cluster2
vp2 have layer nr:2[Cluster3 Esmart3 ], primary plane: Cluster3
vp3 have layer nr:0[], primary plane: INVALID
Could not find baseparameter partition
color_format:1
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x2025
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 2025
VOP update mode to: 1920x1080p60, type: HDMI0 for VP0
dclk:148500000,if_pixclk_div;2,if_dclk_div:4
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
VP0 set crtc_clock to 1485KHz
VOP VP0 enable Cluster0[800x480->800x480@560x300] fmt[0] addr[0xede00000]
CEA mode used vic=16
mtmdsclock:148500000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 786431 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
vdd_usbc 12868 mV
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
U-Boot 2017.09-g44f011c-dirty #root (Oct 16 2025 - 09:42:19 +0330)
Board: FriendlyELEC RK3588 board
PreSerial: 2, raw, 0xfeb50000
DRAM: 31.7 GiB
Sysmem: init
Relocation Offset: ed900000
Relocation fdt: eb7f9570 - eb7fecd0
CR: M/C/I
Using default environment
optee api revision: 2.0
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
TEEC: Waring: Could not find security partition
DM: v2
boot mode: normal
RESC: 'resource', blk@0x0000a000
lib/avb/libavb_user/avb_ops_user.c: trusty_read_lock_state failed
Error determining whether device is unlocked.
Device is: UNLOCKED
DTB: rk3588-nanopi6-rev06.dtb (275604)
HASH(c): OK
ANDROID: fdt overlay OK
usb dr_mode not found
usb dr_mode not found
usb dr_mode not found
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x80, OFF=0x80
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
use 0xede00000 as drm logo base memory
get vp0 plane mask:0x7, primary id:0, cursor id:2, from dts
get vp1 plane mask:0x148, primary id:6, cursor id:3, from dts
get vp2 plane mask:0x280, primary id:7, cursor id:9, from dts
Could not find baseparameter partition
I2c6 speed: 200000Hz
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:3[Cluster0 Cluster1 Esmart0 ], primary plane: Cluster0
vp1 have layer nr:3[Esmart1 Cluster2 Esmart2 ], primary plane: Cluster2
vp2 have layer nr:2[Cluster3 Esmart3 ], primary plane: Cluster3
vp3 have layer nr:0[], primary plane: INVALID
Could not find baseparameter partition
color_format:1
hdmi_select_link_config use tmds mode
mode:1920x1080 bus_format:0x2025
hdmi@fde80000: detailed mode clock 148500 kHz, flags[5]
H: 1920 2008 2052 2200
V: 1080 1084 1089 1125
bus_format: 2025
VOP update mode to: 1920x1080p60, type: HDMI0 for VP0
dclk:148500000,if_pixclk_div;2,if_dclk_div:4
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
VP0 set crtc_clock to 1485KHz
VOP VP0 enable Cluster0[800x480->800x480@560x300] fmt[0] addr[0xede00000]
CEA mode used vic=16
mtmdsclock:148500000
hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
hdptx phy pll locked!
dw_hdmi_setup HDMI mode
don't use dsc mode
dw hdmi qp use tmds mode
bus_width:0x16a8c8,bit_rate:1485000
hdptx phy lane locked!
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
b0pll 24000 KHz
b1pll 24000 KHz
lpll 24000 KHz
v0pll 24000 KHz
aupll 786431 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
vdd_usbc 12868 mV
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0