static ip while flashing device with ESPixelStick Flash Tool

[marcobrianza]

I have tried disabling "Use DHCP" and setting a static ip in:

FW Version 4.0-ci5943922254
Build Date Aug 22 2023 - 20:53:21
Architecture ESP32
Board Name d32_pro

the setting is not applied and DHCP is enabled

[MartinMueller2003]

please start a new session, configure your settings, perform an upload to the device, press the save logs button. Attach a screenshot of the flashtool with its configuration and the logs to this conversation. I cant really help without that.

[marcobrianza]

logs.txt

here they are, thank you

[MartinMueller2003]

Those all look exactly like they should. There is another button for downloading your configuration to the flashtool. This will create a download file in the dist directory. In a subdirectory you will find the config.json. Please attach it to the conversation.

[marcobrianza]

the download configuration fails with this errors


log2.txt

anyway picking the config.json from the fs folder i get this

{
"cfgver": 1.0,
"init": true,
"device": {
"id": "d32-pro-id-aa"
},
"network": {
"ssid": "colors",
"passphrase": "colors01",
"hostname": "d32-pro-aa",
"ip": "192.168.8.33",
"netmask": "255.255.255.0",
"gateway": "192.168.8.254",
"dhcp": true,
"sta_timeout": 15.0,
"ap_fallback": true,
"ap_timeout": 120.0,
"ap_reboot": true
}
}

It might just be a problem of the flashing tool that does not set the "dhcp" to false

[MartinMueller2003]

That is what I suspect as well. That is why I wanted the config file from the ESP. But if you have DHCP set too false, and that file shows true then there is a problem in the flashtool

[marcobrianza]

who is maintaining the tool?

[MartinMueller2003]

Shelby is primary and I do some work on it as needed.

[marcobrianza]

do I need to open an issue for it, or you can manage it?

[MartinMueller2003]

This has been fixed and a new tool is used to flash: https://espixelstickwebflasher.from-ct.com:5000/