diff --git a/ipApp/Db/XGS600-gauge.template b/ipApp/Db/XGS600-gauge.template
new file mode 100644
index 0000000..0f0a864
--- /dev/null
+++ b/ipApp/Db/XGS600-gauge.template
@@ -0,0 +1,23 @@
+# 
+# Database to read gauge pressure from Agilent XGS600 controllers.
+#
+# Parameters:
+#   $(SYSTEM):     PV prefix
+#   $(CONTROLLER): Controller name from st.cmd
+#   $(CHANNEL):    Channel number
+#
+
+record(ai, "$(SYSTEM):getPressure")
+{
+	field(DESC, "Reads Cell $(CONTROLLER) Pressure")
+	field(SCAN, "1 second")
+	field(DTYP, "stream")
+	field(INP, "@XGS600.proto getPressure($(CHANNEL)) $(CONTROLLER)")
+	field(PINI, "YES")
+	field(EGU,  "mbar")
+	field(VAL, "0")
+	field(PREC, "3")
+	field(LOLO, "1.333E-12") field(LLSV, "MAJOR")
+	field(HIGH, "1E-7")		 field(HSV,  "MINOR")
+	field(HIHI, "1E-6")		 field(HHSV, "MAJOR")
+}
diff --git a/ipApp/Db/XGS600-setpoints.template b/ipApp/Db/XGS600-setpoints.template
new file mode 100644
index 0000000..5c5b61e
--- /dev/null
+++ b/ipApp/Db/XGS600-setpoints.template
@@ -0,0 +1,96 @@
+# 
+# Agilent XGS600 controllers setpoints control system.
+#
+# Description
+#   - Database designed to assign two relays setpoints to a single gauge.
+#   - Set both relays numbers to same value in case of single relay setup.
+#   - Off setpoint: pressure in which the gauge generates interlock signal.
+#   - On setpoint:  pressure in which the gauge clears the interlock
+#   - When pressure reaches OFF level, it must reach ON level so the interlock
+#     is cleared
+#   - OFF > ON
+#
+# Parameters:
+#   - $(SYSTEM): PV prefix.
+#   - $(CHANNEL): Channel number with regard to the IOC
+#   - $(CONTROLLER): Controller name from st.cmd
+#   - $(PORT): Channel number with regard to the controller
+#   - $(SP1): 1st setpoint relay 
+#   - $(SP2): 2nd setpoint relay
+# 
+
+record(ao, "$(SYSTEM):setOffSetpoint$(CHANNEL)")
+{
+	field(DESC, "Sets Cell  $(CONTROLLER) Off pressure setpoint")
+	field(DTYP, "stream")
+	field(OUT,  "@XGS600.proto setRedundantOffSp($(PORT),$(SP1),$(SP2),$(SYSTEM):setOnSetpoint$(CHANNEL)) $(CONTROLLER)")
+    field(PINI, "NO")
+    field(PREC, "3")
+	field(EGU,  "mbar")
+    field(LOLO, "") field(LLSV, "NO_ALARM")
+    field(HIHI, "") field(HHSV, "NO_ALARM")
+}
+
+record(ao, "$(SYSTEM):setOnSetpoint$(CHANNEL)")
+{
+	field(DESC, "Sets Cell  $(CONTROLLER) Off pressure setpoint")
+	field(DTYP, "stream")
+	field(OUT,  "@XGS600.proto setRedundantOnSp($(PORT),$(SP1),$(SP2)) $(CONTROLLER)")
+    field(PINI, "NO")
+    field(PREC, "3")
+	field(EGU,  "mbar")
+    field(LOLO, "") field(LLSV, "NO_ALARM")
+    field(HIHI, "") field(HHSV, "NO_ALARM")
+}
+
+record(ai, "$(SYSTEM):getOffSetpoint$(CHANNEL)")
+{
+	field(DESC, "Reads Cell  $(CONTROLLER) Off pressure setpoint")
+	field(SCAN, "1 second")
+	field(DTYP, "stream")
+	field(INP,  "@XGS600.proto getOffSetpoint($(SP1)) $(CONTROLLER)")
+	field(PINI, "YES")
+    field(PREC, "3")
+	field(EGU,  "mbar")
+    field(LOLO, "") field(LLSV, "NO_ALARM")
+    field(HIGH, "") field(HSV,  "NO_ALARM")
+    field(HIHI, "") field(HHSV, "NO_ALARM")
+}
+
+record(ai, "$(SYSTEM):getOnSetpoint$(CHANNEL)")
+{
+	field(DESC, "Reads Cell  $(CONTROLLER) Off pressure setpoint")
+	field(SCAN, "1 second")
+	field(DTYP, "stream")
+	field(INP,  "@XGS600.proto getOnSetpoint($(SP1)) $(CONTROLLER)")
+	field(PINI, "YES")
+    field(PREC, "3")
+	field(EGU,  "mbar")
+    field(LOLO, "") field(LLSV, "NO_ALARM")
+    field(HIGH, "") field(HSV,  "NO_ALARM")
+    field(HIHI, "") field(HHSV, "NO_ALARM")
+}
+
+record(mbbi, "$(SYSTEM):getChannel$(CHANNEL)Relay1State")
+{
+	field(DESC, "Read channel $(CHANNEL) relay 1 state")
+	field(DTYP, "stream")
+	field(INP,  "@XGS600.proto getSetpointState($(SP1)) $(CONTROLLER)")
+	field(SCAN, "1 second")
+	field(PINI, "YES")
+	field(ZRVL, "0") field(ZRST, "OFF")  field(ZRSV, "MAJOR")
+	field(ONVL, "1") field(ONST, "ON")   field(ONSV, "MAJOR")
+	field(TWVL, "3") field(TWST, "Auto") field(TWSV, "NO_ALARM")
+}
+
+record(mbbi, "$(SYSTEM):getChannel$(CHANNEL)Relay2State")
+{
+	field(DESC, "Read channel $(CHANNEL) relay 2 state")
+	field(DTYP, "stream")
+	field(INP,  "@XGS600.proto getSetpointState($(SP2)) $(CONTROLLER)")
+	field(SCAN, "1 second")
+	field(PINI, "YES")
+	field(ZRVL, "0") field(ZRST, "OFF")  field(ZRSV, "MAJOR")
+	field(ONVL, "1") field(ONST, "ON")   field(ONSV, "MAJOR")
+	field(TWVL, "3") field(TWST, "Auto") field(TWSV, "NO_ALARM")
+}
diff --git a/ipApp/Db/XGS600.proto b/ipApp/Db/XGS600.proto
new file mode 100644
index 0000000..63d5807
--- /dev/null
+++ b/ipApp/Db/XGS600.proto
@@ -0,0 +1,75 @@
+#
+# XGS600.proto 
+#
+# Stream device protocol file for Agilent XGS600 vacuum gauge controllers
+#
+# Abdalla Al-Dalleh
+# August 13, 2026
+# 
+
+Terminator = CR;
+
+# $1: Channel Number [1-5]
+getPressure
+{
+	out "#0002I\$1";
+	in "%*1c%E";
+
+	@mismatch {
+		in "%*1c%E";
+	}
+}
+
+# $1: Relay Number [1-8]
+getOffSetpoint
+{
+	out "#009\$1";
+	in  "%*1c%E";
+}
+
+getOnSetpoint
+{
+	out "#008\$1";
+	in  "%*1c%E";
+}
+
+# $1: Channel Number [1-5]
+# $2 $3: Relay Number [1-8]
+setRedundantOffSp
+{
+	out "#006\$2I\$1%(\$4.VAL)1.3E";
+	in  ">";
+	out "#007\$2I\$1%1.3E";
+	in  ">";
+
+	out "#006\$3I\$1%(\$4.VAL)1.3E";
+	in  ">";
+	out "#007\$3I\$1%1.3E";
+	in  ">";
+}
+
+setRedundantOnSp
+{
+	out "#006\$2I\$1%1.3E";
+	in  ">";
+	out "#006\$3I\$1%1.3E";
+	in  ">";
+}
+
+setSetpointState
+{
+	out "#005E%(\$1)u%d";
+}
+
+getSetpointState
+{
+	out "#005F\$1";
+	in  "%*1c%u";
+}
+
+debug
+{
+	ExtraInput = Ignore;
+	out "%s";
+	in  "%50c";
+}