dstarrepeater opens but has err 111 tcp connection and will not open modem and uses dummy modem.

[ki8as]

we have the 2meter and 440 modules of the icom repeater with a dstar controler.

I have the modem and network tabs set up as in manual to no avail.

running out of chioces.

help
Tom C

KI8AS

[ki8as]

dv-rptr V2 Network 127.0.0.1 port 2011

…

On Thu, Nov 12, 2020 at 7:00 PM Adrian Fewster ***@***.***> wrote: Modem connect will depend on serial connection being correct. What is the modem type ? The 111 tcp connection error is common and can usually be ignored. What is the modem ? What does (if linux) dmesg | grep ACM tell you, compared to your modem configuration ? Please note that moden versions are on the G4KLX repositories. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ADZRORELUYYGKNFLT55ASQTSPRZITANCNFSM4TT45U4Q> .

[johnhays]

Didn't you say you were running an Icom controller? https://nw-digital-radio.groups.io/g/udrc/wiki/1391#A-Repeater-on-an-Icom-ID-RP2C -- your port looks wrong and as I recall all the repeaters on an RP2C should be at the same port and address.

…

On Thu, Nov 12, 2020 at 4:08 PM ki8as ***@***.***> wrote: dv-rptr V2 Network 127.0.0.1 port 2011 On Thu, Nov 12, 2020 at 7:00 PM Adrian Fewster ***@***.***> wrote: > Modem connect will depend on serial connection being correct. > What is the modem type ? > > The 111 tcp connection error is common and can usually be ignored. > What is the modem ? > What does (if linux) dmesg | grep ACM tell you, > compared to your modem configuration ? > > Please note that moden versions are on the G4KLX repositories. > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#168 (comment)>, or > unsubscribe > < https://github.com/notifications/unsubscribe-auth/ADZRORELUYYGKNFLT55ASQTSPRZITANCNFSM4TT45U4Q > > . > — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#168 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABR7I6W4J75LF2FH4CWC273SPR2I7ANCNFSM4TT45U4Q> .

-- John D. Hays Kingston, WA K7VE