Request for Help: Setting up Raspberry Pi Global Shutter (IMX296) on Jetson Orin Nano with JetPack 6

[aliejabbari]

Hello,

I am trying to get the Raspberry Pi Global Shutter camera, which uses the IMX296 sensor, to work with my Jetson Orin Nano, but I am running into a driver probe failure. I believe the issue is related to hardware enablement (power or reset) and I'm hoping you might be able to provide some guidance based on my device tree and logs.

My Environment:

Host Platform: NVIDIA Jetson Orin Nano Developer Kit

Software: NVIDIA JetPack 6 (L4T R36.3)

Camera Module: Raspberry Pi Global Shutter Camera (IMX296)

[vswdigitall]

Hello, i tried to run waveshare imx296 on jetson orin nano.
Do you have pinout of this sensor?

Found:
1 3.3v
2 3.3v (probably sda)
3 3.3v (probably sdl)
.....

15 gnd

I am using 15 to 22pins cable, it is ok?

Please help.

[aliejabbari]

See my Repo in :‌ https://github.com/aliejabbari/IMX296-Global-Shutter-Camera-Driver-for-NVIDIA-Jetson-Orin-JetPack-6.2-

[vswdigitall]

See my Repo in :‌ https://github.com/aliejabbari/IMX296-Global-Shutter-Camera-Driver-for-NVIDIA-Jetson-Orin-JetPack-6.2-
Do you provide sources?

[vswdigitall]

I compiled this but it does not work: https://github.com/doruktoto/IMX296_Nvidia_Jetson_Orin_Nano_Super_Driver

[aliejabbari]

send me an email alijabbari.contact@gmail.com

[vswdigitall]

send me an email alijabbari.contact@gmail.com

I wrote to you.