|
| 1 | +# Hinge Ideas |
| 2 | + |
| 3 | +This page contains 3D-printable hinge ideas for the HUB75 display enclosure. |
| 4 | + |
| 5 | +The examples are collected as possible starting points rather than final selections. |
| 6 | + |
| 7 | +## Stop Hinge |
| 8 | + |
| 9 | +[MakerWorld — Stop Hinge](https://makerworld.com/nl/models/2644412-stop-hinge#profileId-2922394) |
| 10 | + |
| 11 | + |
| 12 | + |
| 13 | +This hinge has an integrated stop that limits its maximum opening angle. |
| 14 | + |
| 15 | +It may be useful when a lid or support panel must stop at a defined angle without using a separate cable or support arm. |
| 16 | + |
| 17 | +Possible applications include: |
| 18 | + |
| 19 | +- A hinged rear cover |
| 20 | +- A folding support panel |
| 21 | +- A lid that also functions as a support |
| 22 | +- Limiting the opening angle of an enclosure part |
| 23 | + |
| 24 | +## Hidden Hinge |
| 25 | + |
| 26 | +[MakerWorld — Hidden Hinge](https://makerworld.com/nl/models/252533-hidden-hinge#profileId-268869) |
| 27 | + |
| 28 | + |
| 29 | + |
| 30 | +This hinge is intended to be concealed when the connected parts are closed. |
| 31 | + |
| 32 | +A hidden hinge could provide a cleaner exterior because the hinge does not remain visibly mounted on the outside of the enclosure. |
| 33 | + |
| 34 | +Points to consider include: |
| 35 | + |
| 36 | +- Required recesses in the wooden panels |
| 37 | +- Available panel thickness |
| 38 | +- Clearance during opening |
| 39 | +- Strength of the printed parts |
| 40 | +- Access to the mounting screws |
| 41 | + |
| 42 | +## 180-Degree Strong Hinge |
| 43 | + |
| 44 | +[MakerWorld — 180° Strong Hinge, 36 mm](https://makerworld.com/nl/models/243010-180deg-strong-hinge-36mm#profileId-259247) |
| 45 | + |
| 46 | + |
| 47 | + |
| 48 | +This design is presented as a strong hinge with an opening range of up to 180 degrees. |
| 49 | + |
| 50 | +The linked version is identified as a 36 mm model. |
| 51 | + |
| 52 | +It may be useful when a panel must fold completely back against another part of the enclosure. |
| 53 | + |
| 54 | +Possible applications include: |
| 55 | + |
| 56 | +- A fold-back rear panel |
| 57 | +- A lid that opens flat |
| 58 | +- A support panel that folds against the enclosure |
| 59 | +- A cover that must remain out of the way when opened |
| 60 | + |
| 61 | +## 180-Degree Opening Gate Hinge |
| 62 | + |
| 63 | +[MakerWorld — 180° Opening Gate Hinge, PETG](https://makerworld.com/nl/models/1175797-180deg-opening-gate-hinge-petg#profileId-1185005) |
| 64 | + |
| 65 | + |
| 66 | + |
| 67 | +This is a 3D-printable gate-style hinge designed to open up to 180 degrees. |
| 68 | + |
| 69 | +The model is intended to be printed in PETG. It may be useful when a lid or support panel needs a relatively large, externally mounted hinge. |
| 70 | + |
| 71 | +Possible applications include: |
| 72 | + |
| 73 | +- A rear panel that opens completely |
| 74 | +- A folding support panel |
| 75 | +- A lid that folds back against the enclosure |
| 76 | +- A larger hinge connection with accessible mounting points |
| 77 | + |
| 78 | +## Comparison |
| 79 | + |
| 80 | +| Design | Main Characteristic | Possible Use | |
| 81 | +|---|---|---| |
| 82 | +| Stop hinge | Integrated opening stop | Support panel or limited-angle lid | |
| 83 | +| Hidden hinge | Concealed when closed | Clean exterior finish | |
| 84 | +| 180° strong hinge | Compact 36 mm design | Fold-back lid or panel | |
| 85 | +| 180° gate hinge | Larger external gate-style hinge | Rear panel or folding support | |
| 86 | + |
| 87 | +## Considerations |
| 88 | + |
| 89 | +Before selecting a hinge, the following should be checked: |
| 90 | + |
| 91 | +- Required opening angle |
| 92 | +- Load on the hinge |
| 93 | +- Panel thickness |
| 94 | +- Screw positions |
| 95 | +- Required mounting clearance |
| 96 | +- Print material |
| 97 | +- Print orientation |
| 98 | +- Whether a metal hinge pin or additional hardware is required |
| 99 | + |
| 100 | +## Notes |
| 101 | + |
| 102 | +- |
0 commit comments