microSmartHome/Constants.h at master · andre-i/microSmartHome · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
#ifndef Constants_h
#define Constants_h

// Read type
// if set 1 then VOLTAGE_PIN be read analog value on it
#define READ_AS_ANALOG 0

/*
 * ============================DEFINIONS==================================
 */

/*  debug mode ----- DEBUG ----- debug mode */
#define DEBUG 0

// critical values
#define MIN_FIRING_THEMPERATURE  30
#define UCS2_PHONE_SIZE 48

//  modem pins
#define RX_PIN   3
#define TX_PIN  4

// Pin for One wire
#define ONE_WIRE_BUS    7
// ----- motion sensors ----
#define MOTION_SENSOR_PIN  2
#define DROP_MOTION_TIME 900
// ---- signals led on aruino board ----
#define LED_PIN   13
// -----  voltage pin
#define VOLTAGE_PIN  14
// ---- tune button  ----
#define BUTTON_PIN    5
#define DUCT_PIN   6
#define MIN_PRESSED_COUNT 6
// reset
#define RST_PIN    9
// hard reset - SIM900 POWER OFF
#define SIM_RST     LOW  //  sim900 power reset level 0 - reset
#define SIM_NO_RST  HIGH //  level 1 - in work

// ----  check sensors time  ----
#if DEBUG==0
#define CHECK_SENSOR_TICK 180
#else
#define CHECK_SENSOR_TICK 60
#endif

// audio files
#define FIRING_SOUND  "firing.amr"
#define HOUSE_SOUND  "house.amr"
#define MOTION_SOUND "motion.amr"
#define BAD_SOUND   "bad.amr"
#define GOOD_SOUND "good.amr"
#define VAWE_SOUND "vawe.amr"
#define CAT_SOUND "cat.amr"
#define THERMO_BAD "termoBad.amr"
#define NO_VOLTAGE "noVoltage.amr"

//   delays beetwen send sms
#define DELAY_FOR_VOLTAGE  65400  // ~18 hour beetwen send outer voltage is noll (0v)
#define DELAY_FOR_COOL  32400   // 9 hour beetwen send very small firing themperature
#define DELAY_FOR_MOTION 14400  // 4 hour beetwen send motion in house
// delay times (wait for module answer)
#define DELAY_FOR_OK  2
#define DELAY_FOR_ANSWER  5
#define DELAY_FOR_SOUND  10

//  SMS formats
#define GSM_FORMAT "GSM"
#define UCS2_FORMAT "UCS2"

// send SMS
#define SEND_SMS 1
#define NO_SEND_SMS 0
/* =======================CONSTANTS========================== */

// return codes
enum retCodes {
  SUCCESS = 0,
  NO_SEND = 1,
  IS_EMPTY = 2,
  WRONG_DATA = 3,
  WRONG_TASK = 4,
  NO_PLAY_SOUND = 5,
  EXIT = 6,
  ASSIGN_ADMIN = 7,
  RETURN_ERROR = 8,
  WRONG_USER = 9,
  SEND_INFO_SMS = 10,
  SET_COOL_THEMPERATURE_RECORD = 11
};

// clients ( first record is admin )
enum clients {
  ADMIN = 1,
  CLIENT1 = 2,
  CLIENT2 = 3,
  COOL_THEMPERATURE_RECORD = 4,
  IS_SEND_MOTION_RECORD = 5,
  WRITE_API_KEY = 6,
  FIELDS_LIST = 7
};

// types modem requests
enum requests {
  INC_SMS = 1,
  INC_CALL = 2,
  UNDEFINED = 3
};

//  http service
//  api key is 5 record in sim phone book


/*   DATA in flash  */
//
// -------------------------- SMS messages ------------------------------------
#define MAX_MESS_LEN 90
//  message on cool themperature "низкая температура";
const char  cool[] PROGMEM =  "043d04380437043a0430044f002004420435043c043f0435044004300442044304400430\0";
//  message on trigged motion sensor "Движение в доме" ; 61 symbols
const char  motion[] PROGMEM = "04140432043804360435043d043804350020043200200434043e043c0435\0";
//  Turn off voltage  "Пропало напряжение!"  77 symbols
const char  voltage[] PROGMEM = "041f0440043e043f0430043b043e0020043d0430043f0440044f04360435043d043804350021\0";

const char *const messages[] PROGMEM = { cool, motion, voltage };
//  for choose messages
enum { COOL, MOTION, VOLTAGE };

// ---------- PUBLIC FUNCTIONS  ------------------------
//       it placke - smartHome.ino

//  need for wait of the answer from modem
void setEspiredTime(uint8_t delayTime);
// return 0 if src contains pattern , 1 - otherwise
//int findInStr( char *src, char *pattern);

#endif