FLIRS after rescue mode not working

[michapr]

Creating a FLIRS device (maybe sleeping is the same) the Z-Uno will not more be available via USB.
So for any updating program code (not Z-Wave related) Z-Uno should be in rescue mode.

After uploading code seems Z-Uno will not go back into the FLIRS mode - the LED is still blinking and USB is active.

Even only setting rescue mode (without any upload) we can not leave this mode - reset or power off does not help.

Only way is to exclude device and include it again.

Would be nice to change it.

Michael

[michapr]

additional - even if not excluding/including:
After code update (not Z-Wave related code, only something inside the "loop") - the getter fuchtion will not work more and will return "0" instead of the given value (in my case for testing a fixed value)

[2017-01-05 10:20:54.313] [D] [zway] SENT ACK
[2017-01-05 10:20:54.315] [I] [zway] Job 0x13 (SensorMultilevel V5 Get): Delivered
[2017-01-05 10:20:54.316] [D] [zway] SETDATA controller.data.outgoingPacket.delivered = True
[2017-01-05 10:20:54.317] [D] [zway] SETDATA controller.data.outgoingPacket.deliveryTime = 20 (0x00000014)
[2017-01-05 10:20:54.319] [D] [zway] SETDATA controller.data.outgoingPacket.packetLength = 11 (0x0000000b)
[2017-01-05 10:20:54.322] [D] [zway] SETDATA controller.data.outgoingPacket = **********
[2017-01-05 10:20:54.324] [D] [zway] SendData Response with callback 0x76 received: received by recipient
[2017-01-05 10:20:54.325] [D] [zway] SETDATA devices.50.data.lastSend = 494161905 (0x1d744ff1)
[2017-01-05 10:20:54.331] [D] [zway] Job 0x13 (SensorMultilevel V5 Get): success
[2017-01-05 10:20:54.333] [I] [zway] Removing job: SensorMultilevel V5 Get
[2017-01-05 10:20:54.334] [D] [zway] RECEIVED: ( 01 0F 00 04 00 32 09 60 0D 01 00 31 05 01 00 00 96 )
[2017-01-05 10:20:54.336] [D] [zway] SENT ACK
[2017-01-05 10:20:54.337] [D] [zway] SETDATA controller.data.incomingPacket.nodeId = 50 (0x00000032)
[2017-01-05 10:20:54.338] [D] [zway] SETDATA controller.data.incomingPacket.frameType = "singlecast"
[2017-01-05 10:20:54.340] [D] [zway] SETDATA controller.data.incomingPacket = **********
[2017-01-05 10:20:54.342] [D] [zway] SETDATA devices.50.data.lastReceived = 0 (0x00000000)
[2017-01-05 10:20:54.344] [D] [zway] SETDATA devices.50.instances.1.commandClasses.49.data.1.deviceScale = 0 (0x00000000)
[2017-01-05 10:20:54.351] [D] [zway] SETDATA devices.50.instances.1.commandClasses.49.data.1.scaleString = "°C"
[2017-01-05 10:20:54.363] [D] [zway] SETDATA devices.50.instances.1.commandClasses.49.data.1.val = 0.000000
[2017-01-05 10:20:54.364] [D] [zway] SETDATA devices.50.instances.1.commandClasses.49.data.1 = Empty