Json config update

Author: PyCos

debian/guppyconfig.json

@@ -1,24 +1,63 @@
 {
-  "default_printer": "default_printer",
-  "display_rotate": 0,
-  "log_path": "<PRINTER_DATA_DIR>/logs/guppyscreen.log",
+  "config_path": "/usr/data/guppyscreen/guppyconfig.json",
+  "default_printer": "k1",
+  "display_rotate": 3,
+  "display_sleep_sec": 300,
+  "guppy_init_script": "/etc/init.d/S99guppyscreen",
+  "invert_z_direction": true,
+  "log_path": "/usr/data/printer_data/logs/guppyscreen.log",
   "printers": {
-    "default_printer": {
+    "k1": {
       "default_macros": {
-        "cooldown": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0\nSET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0",
-        "load_filament": "LOAD_MATERIAL",
-        "unload_filament": "UNLOAD_MATERIAL"
+        "cooldown": "_GUPPY_COOLDOWN",
+        "cooldown_backup": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0\nSET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0",
+        "load_filament": "_GUPPY_LOAD_MATERIAL",
+        "unload_filament": "_GUPPY_QUIT_MATERIAL"
       },
-      "display_sleep_sec": 600,
-      "fans": [],
+      "fans": [
+        {
+          "display_name": "Toolhead Fan",
+          "id": "output_pin fan0"
+        },
+        {
+          "display_name": "Back Fan",
+          "id": "output_pin fan1"
+        },
+        {
+          "display_name": "Side Fan",
+          "id": "output_pin fan2"
+        }
+      ],
+      "leds": null,
       "log_level": "debug",
-      "monitored_sensors": [],
+      "monitored_sensors": [
+        {
+          "color": "red",
+          "controllable": true,
+          "display_name": "Extruder",
+          "id": "extruder"
+        },
+        {
+          "color": "purple",
+          "controllable": true,
+          "display_name": "Bed",
+          "id": "heater_bed"
+        },
+        {
+          "color": "blue",
+          "controllable": false,
+          "display_name": "Chamber",
+          "id": "temperature_sensor chamber_temp"
+        }
+      ],
       "moonraker_api_key": false,
       "moonraker_host": "127.0.0.1",
       "moonraker_port": 7125
     }
   },
-  "guppy_init_script": "service guppyscreen",
-  "thumbnail_path": "<GUPPY_DIR>/thumbnails",
+  "prompt_emergency_stop": true,
+  "theme": null,
+  "thumbnail_path": "/usr/data/printer_data/thumbnails",
+  "touch_calibrated": false,
   "wpa_supplicant": "/var/run/wpa_supplicant"
 }