switch2 dead zone function

[abb68]

I'm using the Adafruit Feather USB Host board, and when I use the anti-deadzone feature in switch2, it keeps drifting to the bottom-left and can't be used normally.

[abb68]

And l3 and r3 are always opposite

[MegaCadeDev]

Where are you getting an anitdeadzone feature? Is this on the config site or on the switch?

[abb68]

你是从哪里获得的 anitdeadzone 功能？这是在配置网站上还是在交换机上？

Here: https://megacadedev.github.io/OGX-Mini-2026-WebApp/

[MegaCadeDev]

I see, I haven't changed anything with the webapp so I was not aware that feature existed. I can take a look at it later and see what's causing the issues.

[abb68]

I see, I haven't changed anything with the webapp so I was not aware that feature existed. I can take a look at it later and see what's causing the issues.

That's great! I really need this feature for playing Apex.

[abb68]

I see, I haven't changed anything with the webapp so I was not aware that feature existed. I can take a look at it later and see what's causing the issues.

You can check out the anti-dead zone function of the gp2040-ce; that one works fine.

[MegaCadeDev]

DeadZoneSwitch2Fix.zip

Hey can you test this for me and see if it has resolved your issue? Thank you.

[abb68]

DeadZoneSwitch2Fix.zip

Hey can you test this for me and see if it has resolved your issue? Thank you.

Ran into a bug where the web app can't save, and then the anti-deadzone feature seems to have completely stopped working.

[abb68]

Anti-Deadzone Circular function not working The controller lost connection with the RP2040 after a little while

[MegaCadeDev]

Test2.zip

Try this and let me know.

[abb68]

Test2.zip

Try this and let me know.

This version can now save properly, but it still doesn't feel like the controller's deadzone-free drift is back. After being connected for a while, it still disconnects.

[MegaCadeDev]

What controller are you using that is disconnecting? Is it the dongle disconnecting from the console or the controller from the dongle? How long is it taking before a disconnect happens?

Try this fix and let me know if that works.

Test2.zip

[abb68]

你用的是什么手柄导致断线？是接收器和主机断开了，还是手柄和接收器断开了？断线需要多长时间？

试试这个方法，如果有效告诉我。

Test2.zip

I was using the DS4 and DS5, and after about a minute, the controller and receiver disconnected.

[MegaCadeDev]

Is the deadzone feature working now?

[abb68]

死区功能现在正常工作了吗？

It wasn't working properly, and then I noticed that as soon as I entered the game, the controller would immediately disconnect from the device.