TRCC @Windows 11?
Hi, sorry im new & noobie, but i wanted to know if your tool is only for Linux or W11 aswell?
Bc "Gemini" send me here in the search of a better way to show/read CPU+GPU temp & Utilization, specifically with LESS impact on CPU perf.
Gemini said there is an Github Tool specifally for my:
Peerless Assassin 120 Digital (Display only)
PA120D
which will read them (4x) %-numbers not through an extra "HWinfo" task but through an Windows tool which wont cause an extra background task or affect CPU/Perfomance..
So, even tho both tasks "TRCC" & "Hwinfo" only use 0.1-0.4% CPU each (task manager) @14700K,
I hoped there may is an Github tool ONLY for the PA120D "Display" so show them 4 numbers, hopefully also (or even without) them RGB colours chaning by temp & usage, so low temps are green, high temps are red, and low Utilziation is blue etc.. just like the normal TRCC app
At least Gemini said even for the easy PA120D Display the constant "hwinfo" task pulling them infos could cause slight worse fps, and i noticed in Arc Raiders @140fps cap (60-80% GPU) i got small frametimes spikes/ fps going down to ~138fps every 1-2 seconds for very short time (even when standing still) and if i close TRCC (hwinfo task closes automatically) its not dipping down so often, rather i have 141fps sometimes.
So could it really be the TRCC/Hwinfo background task and if this may is for LINUX ONLY, are there W11 ways or tools to let it run more efficent? or is it already as efficent as it gets?
note: i do always manually change both task to "Efficiency Mode" - still get this problem even tho it should be forced to run @E-cores with low priority, right?
Best Regards, keeping up the good work :)
1ToolsOn
TRCC @Windows 11?
Hi, sorry im new & noobie, but i wanted to know if your tool is only for Linux or W11 aswell?
Bc "Gemini" send me here in the search of a better way to show/read CPU+GPU temp & Utilization, specifically with LESS impact on CPU perf.
Gemini said there is an Github Tool specifally for my:
Peerless Assassin 120 Digital (Display only)
PA120D
which will read them (4x) %-numbers not through an extra "HWinfo" task but through an Windows tool which wont cause an extra background task or affect CPU/Perfomance..
So, even tho both tasks "TRCC" & "Hwinfo" only use 0.1-0.4% CPU each (task manager) @14700K,
I hoped there may is an Github tool ONLY for the PA120D "Display" so show them 4 numbers, hopefully also (or even without) them RGB colours chaning by temp & usage, so low temps are green, high temps are red, and low Utilziation is blue etc.. just like the normal TRCC app
At least Gemini said even for the easy PA120D Display the constant "hwinfo" task pulling them infos could cause slight worse fps, and i noticed in Arc Raiders @140fps cap (60-80% GPU) i got small frametimes spikes/ fps going down to ~138fps every 1-2 seconds for very short time (even when standing still) and if i close TRCC (hwinfo task closes automatically) its not dipping down so often, rather i have 141fps sometimes.
So could it really be the TRCC/Hwinfo background task and if this may is for LINUX ONLY, are there W11 ways or tools to let it run more efficent? or is it already as efficent as it gets?
note: i do always manually change both task to "Efficiency Mode" - still get this problem even tho it should be forced to run @E-cores with low priority, right?
Best Regards, keeping up the good work :)
1ToolsOn