Create page for Alienware cloning steps

[AngelaKimmy]

Part 1

1. Krypton-Core plugs into thunderbolt port in the back
2. Clone USB, plugs into any port
3. Power on
4. Hold down F2 for setup
   • Confirm 256 GB SSD
   • Confirm system memory is 32GB
5. Navigate to Advanced Tab
6. Go down to SATA Operation
   • Set it to AHCI
   • Select Yes
7. Navigate to Boot Tab
   • Select Boot List Option
     • Choose UEFI
     • Choose Yes
   • Choose Secure Boot
     • Select Enabled
     • Choose Yes
8. Navigate to Security Tab
   • Select Firmware TPM
     • Choose Enabled
9. Navigate to Exit Tab
   • Save Changes and Reset
   • Choose Yes

Part 2

1. Hold F12 when computer turns back on
2. Select UEFI OS(USB2.0 FlashDisk 1100)
3. Select Clonezilla live (VGA with large font & To RAM)
4. Choose English
5. Choose “Keep…”
6. Start Clonezilla
7. Choose “device-device…”
8. Choose beginner
9. Choose “disk_to_local_disk…”
10. ***NOTE: Disk number should be 3
11. 🔴THE MOST IMPORTANT STEP🔴Under “Choose local disk as SOURCE”
    • Choose “…240G_M.2P310…”
12. Under “Choose local disk as target…”
    • Select “nvme0n1 256GB….P300”
13. Choose first option (“-sfsck Skip…”)
14. Select -k1
15. Choose “choose”
16. When you see “WARNING WARNING WARNING”
    • CONFIRM SOURCE IS “256GB_Patriot…P300”
    • Type y and hit enter
17. When you see “WARNING WARNING WARNING”
    • CONFIRM SOURCE IS “256GB_Patriot…P300”
    • Type y and hit enter
18. Once it completes, hit enter
19. Select poweroff
20. Wait for all lights to turn off before proceeding
21. Unplug Clone USB
22. Unplug Krypton-Core
23. Turn laptop back on
24. Select okay (should automatically sign in as student)
25. Open up File Explorer
26. Choose This PC
27. Confirm harddrive is there and and has about 140 GB free
28. Open settings app
29. In Home rename Krypton-Core to Krypton- ie Krypton-1
30. Apply label maker labels to laptop chassis
    1. Front top right (readable when open)
    2. Left side toward front
    3. Right side toward front
31. On bottom of laptop cover property sticker with SN banner sticker (make it readable with other text on back)

[AngelaKimmy]

SATA set to RAID
Secure boot was off
TPM was off

[AngelaKimmy]

For Part 2 Step 14, did -k0

[AngelaKimmy]

Must be GUID partition